Gonna give Linux another try, any guidance is welcome!

[auster@thebrainbin.org]

Dunno what sort of setup you have, but what I would do, considering my setup and by being a tad on the neurotic side, is to unscrew and detatch any drives but the one to be flashed. This, I think, is the only way to be absolutely sure nothing goes in the wrong place.

[dagnet@lemmy.world]

I would need to dismantle almost everything and would lose the heatsink past on my nvme too, I will just try disabling it since I dont really see how that would be different from removing, not like the fedora installer can mess with my bios settings no?

[lordnikon@lemmy.world]

The best advice I can give you is to switch to Linux is don't right away. Switch the applications you use to open source or Linux compatible alternatives that also run on windows. Then after you get used to those on windows then make the switch.

I would also recommend not dual booting at first since it's too easy to jump ship at the slightest issue vs sticking with it to figure out the issue just like you would with a problem on windows. It's a real thing I have experienced it in reverse as a long time Linux user that tried Windows 11 i kept jumping back to Linux every time I ran into issues that caused frustration.

[Guest]

rawdog arch

[just_another_person@lemmy.world]

Yep! Grub should show you the Fedora or Windows boot options though, so you shouldn't need to flop back and forth in the BIOS.

[bad_news@lemmy.billiam.net]

As a n00b I'd go Mint, unless you have hardware concerns in which case Fedora is the only option these days (Ubuntu is bad now). I have used Linux since 1996 and would not dualboot in 2025. Microsoft will fuck your shit. Just roll with two boxes.

[mentaledge@sopuli.xyz]

This should be sufficient. Go for it.

[auster@thebrainbin.org]

Been some years since I last used Fedora, so not able to confirm nor deny anything. Sorry for not being able to help further. =/

[mentaledge@sopuli.xyz]

You wont get windows in Grub, but since you're using separate drives, you can boot each one by just setting the boot drive in BIOS.

[sniggleboots@lemm.ee]

But boxes famously don't roll!

[dagnet@lemmy.world]

Seems my motherboard cannot disable nvme, I might try disconnecting it

[ocean@lemmy.selfhostcat.com]

I advice installing fedora gnome and enjoying

[maiq@lemy.lol]

If you have 2 separate drives each with their own boot loader and you tell your bios to boot from the grub bootloader and grub has successfully detected another OS like windows everything will be fine.

The trouble with dual booting comes from splitting a drive into partitions with different OS's on them sharing the same boot partition. Eventually windows will nuke grub and you will loose the ability to boot linux till you use a live USB to repair through chroot and fixing/installing grub manually or using a grub-repair live USB. Usually only gets complicated if you have luks set up.

I don't advise dual booting on a single drive. I intentionally buy gaming laptops with dual drive setups and keep the windows partition untouched till the warranty is out. Just in case i have to send it in for repair. Been doing this since 2004 without ever having any bootloader issues that I didn't cause myself.

[kirk@startrek.website]

Fedora is a solid choice. I recommend Kinoite because it's familiar to Windows users and impossible to break.

[dagnet@lemmy.world]

Turns out my boot partition was on my other drive somehow (the drive I installed Linux) , am I completely fucked now?

[webghost0101@sopuli.xyz]

For new users the main question is not what operating system but what window manager as that is what shapes day to day user interaction. KDE plasma is a solid choice.

Installing it on a separate drive should be no problem. Just select the correct drive during install.

I use F10 to get to the boot menu on drive and select the drive it needs to boot from there. I have used it once in the last year and although it required many updates its still working.

[blayd@lemmy.ml]

Did you manually partition? It sounds like when you installed Nobara the /boot/efi partition got formatted, a similar thing happened to me recently (just wasnt paying attention), I used a Windows install USB to get a command prompt and restore the EFI entry.

[baumgeist@lemmy.ml]

Can someone please guide me into installing it the safest way possible?

1. Get the installation image you want to use. Fedora has a lot of different flavors, I think they call them "spins," so it's important to know the difference and choose the right one for you.

2. Install it on a VM in VirtualBox. Play around with it, figure out what all the installation steps do, don't be afraid to break the VM.

3. Play around with the VM in fullscreen just to get a feel for it. Don't blame the OS for performance issues, that's probably just the resource limitations of a VM.

4. Repeat steps 1-3 as necessary to find an OS that is comfortable enough to be your daily driver.

5. Use a program like Rufus to make a bootable USB out of the installation image.

6. Run the installer like you practiced. MAKE SURE YOU SELECT THE CORRECT HARDDRIVE, DON'T OVERWRITE YOUR WINDOWS DRIVE. Otherwise, besides MAKING EXTRA SURE ABOUT WHICH HARDDRIVE YOU INSTALL IT TO, use defaults for settings you aren't sure about.

I want to install Fedora on a separate drive and keep my windows drive completely intact (Need it for work).

I cannot stress the above warning enough: formatting the drive is the one step in installation that cannot be undone. If you format your windows drive, you cannot ever recover that data anymore.

Since it's work related hardware, I have 2 pieces of advice; you should follow one or the other:

1. Don't. Don't fuck around with work hardware. It should be a separate PC that you literally only ever use to get work done. Whether it's owned by a company or you're self-employeed, mixing your hobby/leisure/gaming/tinker/daily driver with your work computer is a baaaaaad idea. You will get something all fuzzed up, you will try to fix it by reinstalling the OS or otherwise doing disk formatting/partitioning, and you will end up corrupting windows.

2. Okay, so you decided not to heed my warning because you like gaming (or whatever) too much and can't afford a separate desktop/tower rn. i get it, I did the same once and lived to tell the tale (i do have separate machines now, fwiw). In that case, before you install fedora, simply disconnect the Windows drive. Yank it right out and don't reinstall it until you've got linux up and running just how you like it. Not just after the installation, but after the configuration. Then there's no chance you accidentally format/corrupt your drive.

Preferably I would like GRUB to ask which boot option I want to use if my linux drive is set to be my boot drive and to boot straight to windows if its my windows drive set to boot.

If the installer gives you the option, simply install Grub on the same drive as Linux. When you select the linux drive in your BIOS' boot options, it will run grub, which will give you options, including booting into windows if you want. When you select the windows drive in your BIOS' boot options, it will use the windows bootloader (which boots straight into windows, unless you have multiple windows installations).

[nonbinary_sahrah@lemmy.blahaj.zone]

on the second part if you have an efi motherboard I can recommend the refind boot manager which is eseayer to set up.
and you can dual boot from multiple disks.
you have to install the package after setting up your fedora install

here is the official dokumentation from fedora
https://fedoraproject.org/wiki/Refind

[Guest]

I would use two different disks, the one that you have already for windows and a second one for Linux. When you're ready to install Linux Unplug the windows disk, so that you can't screw it up ( been there, did that ) then when you need to use either the Linux or Windows Just choose the start up disk in bios at booting, usually F11, a tiny bit longer than dual booting, but it will save you a lot of hassle. Dual booting is rather dangerous as windows has the annoying habit of wiping Linux grub setups when updating, and Linux has the annoying habit of wiping everything, two different disks, much easier.