I am not a builder… but that does not seem right
-
How does it end?
-
To verify your stud detector works you must point it to your self, make a beeping sound, turn to your significant other and tell them "I'm a stud"
I taught my toddler to scan her mom (my wife) and say "look, I found a stud!"
-
Welp, I can't tell if my faith in professionals has dwindled or my confidence in my DIY skills being up to code has increased upon reading that. Probably both.
Honestly, the requirements to become a professional in most of the trades are pretty minimal because there's a massive shortage of trained workers in basically every trade. The bar is probably the highest for electricians. I'm a refrigeration mechanic and the bar for us is basically subterranean. I've come across "professional" repairs all over the place that are just wild.
Honestly, if you're a DIYer and you're consulting building codes at all then you're probably doing better work than many (but not most) pros. That's why you should never just go with the cheapest contractor you can find for anything. They're cheap for a reason. You really need to ask around and see who is good in your area. One thing that can help is if you can find a contractor that does commercial as well as residential work. It's not 100% but generally they're going to do better work because it's a bit harder to get away with shoddy work with many commercial customers than it is with most residential customers.
-
To verify your stud detector works you must point it to your self, make a beeping sound, turn to your significant other and tell them "I'm a stud"
I don’t have the willpower to not make this joke to my wife.
-
How does it end?
They probably couldn't watch Netflix that time
-
It's up to code until the inspector finds it. And if there's drywall, they're not finding it
This is the explanation for why we can't have nice things
-
Gnomes. Gnomes live inside and use magic to tell you where the stud is. That's show it works.
Those gnomes are pretty shit at magic then. I've yet to encounter a stud finder that works more than 40% of the time which is just enough to keep you using it but not quite enough to be useful.
-
To verify your stud detector works you must point it to your self, make a beeping sound, turn to your significant other and tell them "I'm a stud"
I do miss doing that to my ex-wife. There were those small things that I can't enjoy being single. Well. For now.
-
This post did not contain any content.
The stupider part is that it would be easier to stack out from the other direction.
There are 8 pieces of wood @ 1.5" each = 12"
Studs are 16" on center.So to stack from the right would be 2 pieces to be in the same place.
You can even see the gray box that opens to the wall behind it. That is attached to the stud on the right...its that close. But here I go applying logic to crazy.
-
Don't take off the panels on your electric and light switches. You'll find that they're all like this.
It's like when I first looked into the gap in the sheetrock around my breaker panel and discovered that my basement has at least 1 (and likely many more) fully wired outlets that were just sheetrocked over at some point. I definitely would have been happier if I hadn't known that.
-
I know the adage "if it's stupid and it works, it's not stupid" is a thing, but this might be the exception to the rule
Maxim 43: If it's stupid and it works, it's still stupid and you're lucky.
-
Honestly, the requirements to become a professional in most of the trades are pretty minimal because there's a massive shortage of trained workers in basically every trade. The bar is probably the highest for electricians. I'm a refrigeration mechanic and the bar for us is basically subterranean. I've come across "professional" repairs all over the place that are just wild.
Honestly, if you're a DIYer and you're consulting building codes at all then you're probably doing better work than many (but not most) pros. That's why you should never just go with the cheapest contractor you can find for anything. They're cheap for a reason. You really need to ask around and see who is good in your area. One thing that can help is if you can find a contractor that does commercial as well as residential work. It's not 100% but generally they're going to do better work because it's a bit harder to get away with shoddy work with many commercial customers than it is with most residential customers.
wrote on last edited by [email protected]Aw man, now you're just enabling my bad DIY habit, where I get too ambitious and/or too skeptical of hiring somebody and end up taking way too long to get the project done. I'm this close ->| |<- to committing to a DIY central HVAC system replacement (complete with new 240V circuit for a conversion from gas furnace to heat pump), which is obviously gonna end up with me relying on "temporary" window AC units all summer, and you're just shoving me right over the edge!
-
This post did not contain any content.
Couldn't even bother to level the blocks
smh. -
The stupider part is that it would be easier to stack out from the other direction.
There are 8 pieces of wood @ 1.5" each = 12"
Studs are 16" on center.So to stack from the right would be 2 pieces to be in the same place.
You can even see the gray box that opens to the wall behind it. That is attached to the stud on the right...its that close. But here I go applying logic to crazy.
Or just put the box 4" to the right, directly on the stud. Why on earth they thought it had to be exactly where it is is beyond me.
-
This post did not contain any content.
Ah yes. Load bearing connector box.
-
I had a semi related, IRL, Bethesda style enviornmental story telling 'event' involving a wall happen once.
Back in college... I wasn't actually in this one fraternity, but was friends with almost all the guys in it, was good friends with the core group that restarted its local chapter that had been dormant for like a decade or two.
So one day, its video games and beer, and ... well, this one room needed to be renovated, so we didn't give a fuck. One guy loses at Smash Bros, fucking fist through the wall.
... After he walks back a bit, we notice... wait wtf there's something... on the frame...?
We tear out more of the wall, and no shit, there is a miniature time capsule in the form of a note saying basically 'Cheers to any future (fraternity name)'s, from the class of 1982!' ... and there is also a fucking can of Rainier ... from 1982.
So the dude who initially Donkey Kong'd the wall gets dibs on the 30+ year old stale beer of course, downs it immediately.
... The funny part is that this was always supposed to have been a dry fraternity, no alcohol allowed.
I hope you put a can of beer back in there with a note before you sealed it back up.
-
Aw man, now you're just enabling my bad DIY habit, where I get too ambitious and/or too skeptical of hiring somebody and end up taking way too long to get the project done. I'm this close ->| |<- to committing to a DIY central HVAC system replacement (complete with new 240V circuit for a conversion from gas furnace to heat pump), which is obviously gonna end up with me relying on "temporary" window AC units all summer, and you're just shoving me right over the edge!
Haha. I'm the same way. It's fun to tinker with that stuff. It's actually probably a good thing it's so expensive otherwise I'd have twice as many half finished renovations.
Just be sure you're aware of local laws. At least where I live home owners can do all of their own electrical work as long as they get it inspected but that isn't the case everywhere. As far as the minisplit goes you should be legal to DIY it as long as you use precharged units and linesets. You just can't buy refrigerants or legally tap into the system in any way unless you have an EPA 608 certification. But if you're using precharged linesets and the equipment works then you won't need to do either of those things unless you somehow lose the refrigerant charge. As far as the rest goes just do your research on system sizing, placement, and all that jazz. But as far as DIY goes, a minisplit is probably about the same difficulty level as installing a new gas furnace so if you would be comfortable doing that they you should be fine.
Also if you're going with a heat pump minisplit, I'd go with mitsubishi, not a samsung. The Samsung units are more technically advanced and have more flashy options but they aren't very reliable. I've worked on several that had major issues less than a year after install. They're also more "proprietary" when it comes to working on them. On the other hand I have never come across a dead mitsubishi with less than 5 years of hard use and they're dead simple to work on as far as minisplits go.
-
I taught my toddler to scan her mom (my wife) and say "look, I found a stud!"
I always thought of a stud as a male horse whose main job is supplying baby horse juice. I’m guessing that’s not what you mean?
-
To verify your stud detector works you must point it to your self, make a beeping sound, turn to your significant other and tell them "I'm a stud"
I bought one, put up to my dads back, let it beep, and said to him "i think its defective" 🤪
-
The stupider part is that it would be easier to stack out from the other direction.
There are 8 pieces of wood @ 1.5" each = 12"
Studs are 16" on center.So to stack from the right would be 2 pieces to be in the same place.
You can even see the gray box that opens to the wall behind it. That is attached to the stud on the right...its that close. But here I go applying logic to crazy.
My house is over 30 years old, and the studs are 24" apart. Frustrating when I need to hang things built for 16".
