Looking to get a used router for use with libreCMC
-
I'm looking to get a used router on which to install libreCMC, but the list of supported hardware is quite short. I'd prefer to find something locally, and I doubt that I'd be able to find these particular models. However, I do not intend to use WiFi at all, so I wonder, are there any more recent routers that work 100% with libreCMC except for the WiFi? Preferably something with at least 4 Ethernet ports.
Thanks!
EDIT: What I want to know is which routers do not require any non-free firmware for any of the hardware other than the WLAN. Does anyone know of where to find such information, or how to tell based on the specifications of a router that has not actually been tested with libreCMC?
-
No need, and it's just easier to secure that way.
You can just run Openwrt or Tomato and turn off the wifi.
-
No need, and it's just easier to secure that way.
You.. Don't have a smartphone? Or tablet.. Or laptop? I mean, I also have ethernet ports everywhere in my home and use those most of the time, but wifi sure is nice
-
You.. Don't have a smartphone? Or tablet.. Or laptop? I mean, I also have ethernet ports everywhere in my home and use those most of the time, but wifi sure is nice
I have a laptop that I use at the desk next to where I will put the router, and any network-attached storage will also be right there next to the router, so I have no need for WiFi. It's fine if the WiFi could work of course, but I wouldn't use it, and I imagine that many routers would be 100% compatible with libreCMC if not for the WiFi requiring non-free firmware. What I want to know is which routers these are that don't require any non-free firmware for any of the hardware other than the WLAN.
-
You can just run Openwrt or Tomato and turn off the wifi.
I don't want to run Openwrt or Tomato precisely because they include non-free firmware blobs in order to support the ac/ax WiFi chipsets, and I don't want to spend the time and effort figuring out how to remove those when the developers of libreCMC have already done that.
-
I don't want to run Openwrt or Tomato precisely because they include non-free firmware blobs in order to support the ac/ax WiFi chipsets, and I don't want to spend the time and effort figuring out how to remove those when the developers of libreCMC have already done that.
-
I have a laptop that I use at the desk next to where I will put the router, and any network-attached storage will also be right there next to the router, so I have no need for WiFi. It's fine if the WiFi could work of course, but I wouldn't use it, and I imagine that many routers would be 100% compatible with libreCMC if not for the WiFi requiring non-free firmware. What I want to know is which routers these are that don't require any non-free firmware for any of the hardware other than the WLAN.
I'm sorry, I don't know about routers that much. Here in France you cannot really use another router than the one provided by your ISP
-
I don't want to run Openwrt or Tomato precisely because they include non-free firmware blobs in order to support the ac/ax WiFi chipsets, and I don't want to spend the time and effort figuring out how to remove those when the developers of libreCMC have already done that.
I think a far better option for you then is building your own router, duel ethernet nuc + cheap ethernet switch or a rasberry pi + switch would both run fine and leave some headroom for running a firewall+dns+vpn+etc
-
I'm looking to get a used router on which to install libreCMC, but the list of supported hardware is quite short. I'd prefer to find something locally, and I doubt that I'd be able to find these particular models. However, I do not intend to use WiFi at all, so I wonder, are there any more recent routers that work 100% with libreCMC except for the WiFi? Preferably something with at least 4 Ethernet ports.
Thanks!
EDIT: What I want to know is which routers do not require any non-free firmware for any of the hardware other than the WLAN. Does anyone know of where to find such information, or how to tell based on the specifications of a router that has not actually been tested with libreCMC?
Maybe a potential option is Opnsense on some x86 hardware? Would be really easy to find a mini PC or something.
-
I think a far better option for you then is building your own router, duel ethernet nuc + cheap ethernet switch or a rasberry pi + switch would both run fine and leave some headroom for running a firewall+dns+vpn+etc
While that sounds like an interesting project, I'm not trying to invest a lot of time and effort into this. The grass won't stop growing back while I figure it out.
