We are way overdue for an open source 2d printer
-
Today my HP printer asked my for my GPS location, to allow me to scan a document. Like why? Why is it required to use a basic option?
Ostensibly, that's because the app wants Bluetooth and/or WiFi access so it can connect to the printer. Because you can use WiFi and Bluetooth to determine location (based on large crowd sourced databases of these data points that have been geolocated), the OS has to ask for location permission as well, even if you just need to see WiFi and Bluetooth.
That being said, once they have this permission, I have 0 doubt they log the actual location as well...
Mozilla used to run a free service for this, and collected that data in the background using mobile Firefox. A replacement is https://beacondb.net/, which is still building enough location data to become useful. Services like this aren't nefarious, they're actually really important in getting a quick GPS lock on mobile. Phone hardware actually have pretty poor GPS receivers, but if you can determine an approximate location prior, you get much better results, especially once supplemented with inertial measurements and snapping to mapped roads.
-
We would absolutely love an actual open source printer you can get off the shelf parts and maybe some 3d printing and just use normal liquid ink rather than some inkjet cartridges. And no not some janky 3D printer set up to be a make shift printer, like an actual put the paper in and stuff comes out kind of printer. Prompts for a scanner and copier combo
isn't there like a big difference between a printer and a 3d printer? are you really expecting one device to do both?
-
This post did not contain any content.
My solution is to do all my printing at the library. All the problems related to keeping my ink cartridge ready are now their problem.
-
We would absolutely love an actual open source printer you can get off the shelf parts and maybe some 3d printing and just use normal liquid ink rather than some inkjet cartridges. And no not some janky 3D printer set up to be a make shift printer, like an actual put the paper in and stuff comes out kind of printer. Prompts for a scanner and copier combo
Sounds possible, but not feasible. Haven't researched it, but my gut feeling tells me that it would be quite expensive if it's not mass produced.
-
isn't there like a big difference between a printer and a 3d printer? are you really expecting one device to do both?
There have been scattered hobbyist takes on turning a 3D printer into a plotter (a 2D vector-based type of printer) because the moving around in two dimensions a 3D printer does for each layer is the exact thing a plotter would do with a pen on a sheet of paper. Here's one such project.
-
isn't there like a big difference between a printer and a 3d printer? are you really expecting one device to do both?
They are nothing alike and require wildly different mechanical systems.
-
We would absolutely love an actual open source printer you can get off the shelf parts and maybe some 3d printing and just use normal liquid ink rather than some inkjet cartridges. And no not some janky 3D printer set up to be a make shift printer, like an actual put the paper in and stuff comes out kind of printer. Prompts for a scanner and copier combo
This is the best I can find an open source printers, It uses an ancient HP black cartridge that's still in production which provides you the heads. The cartridge is pretty cheap.
https://www.instructables.com/Make-a-Handheld-InkJet-Printer-Print-on-ANY-Surfac/
The problem is the ink they use brings more to the table than just being expensive. Unless you intend on using a ballpoint pen plotter or you're going back to Dot matrix, you can't just deliver regular ink to a page. The piezo-electric nozzles need a very specific density and viscosity, It needs to dry at just exactly the right time and be able to be cleaned off the nozzle with the lightest wipe. The ink and the nozzles have 50 years of experience behind them.
Making a head go across the page with precision and high resolution is a very well solved problem, couple of steppers some electronics Legos and a 5-minute Google search you could get that part going. But you're going to have to use somebody's printheads and ink because that's well beyond DIY scope.
-
Watch me buy a 1990s hunk of shit laser jet as big as my desk just to fuck with feds
Try a 1980s Genicom with separate containers for toner and waste toner.
-
This post did not contain any content.
-
There have been scattered hobbyist takes on turning a 3D printer into a plotter (a 2D vector-based type of printer) because the moving around in two dimensions a 3D printer does for each layer is the exact thing a plotter would do with a pen on a sheet of paper. Here's one such project.
ah thanks for clarifying
-
This post did not contain any content.
Its crazy how we now have 3D printers that consistently work every time with very little fuss but 2D printers are somehow still shit.
-
Omg, this made me chuckle in the best way. This is the most accurate comic I've seen in a bit. When I got an IT job, printers were so alien to me because I hadn't had one in many years. They're stupid and I hate them, but what are you gonna do.
As someone who spent most of my early IT years dealing with printers, they never get any less alien. Also, they are stupid and I hate them.
-
Yeah, if you don't print enough to justify a laser printer then you probably don't need a printer at all. Just go to the library when you want to print something.
Only suckers buy inkjets.
I have a Brother laser printer that I got 25 years ago that I use so little it's still on the promo cartridge and it works fine any time I need it.
Meanwhile, an ink jet my old job got a few years ago fatally clogged itself after just a few weeks of normal use.
-
Btw, that Nathan Fillion gif is from Castle and not Firefly.
-
HP printers are shit, I don't want one even if you pay me.
Buy a office-class B&W laser from Brother and never worry again. -
Its crazy how we now have 3D printers that consistently work every time with very little fuss but 2D printers are somehow still shit.
That's because it's a lot harder to feed paper and put multicolored tiny dots on it than it is to move a nozzle around and feed a comparatively large squirt of filament.
-
That's because it's a lot harder to feed paper and put multicolored tiny dots on it than it is to move a nozzle around and feed a comparatively large squirt of filament.
But we've had 2D printers for longer? That would imply that its a simpler task, not having to deal with temperature and layer adhesion and all.
-
This post did not contain any content.
If you're worried about opsec and want to like, print subversive pamphlets, one way to do it would be to use a 3D printer. Literally 3D a small printing press. Use 3d printed movable type. Or perhaps better, just print the sheet of a pamphlet as a single print and swap out the pages as you go.
If you wanted a secure way to print something, you could use an open source 3D printer to do it. You're just using it to make plates for a literal old-fashioned screw-type printing press.
-
Even when blocking third party cartridges, they are still infinitely better than all the bullshit HP is pulling.
-
If you're worried about opsec and want to like, print subversive pamphlets, one way to do it would be to use a 3D printer. Literally 3D a small printing press. Use 3d printed movable type. Or perhaps better, just print the sheet of a pamphlet as a single print and swap out the pages as you go.
If you wanted a secure way to print something, you could use an open source 3D printer to do it. You're just using it to make plates for a literal old-fashioned screw-type printing press.
I mean, there’s no reason why a 3D printer couldn’t be rigged up to use a stylus instead of an extruder. (Plotters exist after all.) Probably not very performant compared to your solution though.
I do love the idea of making old timey printing plates using a 3D printer. If you printed in TPU would that make the equivalent of a rubber stamp?
