Vintage
-
Nothing civilized about no hot plugging. Had to restart the whole damn computer, if the cable was loose or out at startup.
skill issue
-
This reminds me when a mouse was an option not a requirement
still is
/i3gang
-
That's how most people used it, yeah. But it's meant to be a midi port which is why it's on sound cards.
It often worked poorly as such though. While it worked great as a joystick port. I drew my own conclusions.
-
Nothing civilized about no hot plugging. Had to restart the whole damn computer, if the cable was loose or out at startup.
I loved the PCs that had Ctrl + up as a shortcut to flip the monitor orientation. I think it was a Dell thing?
My favourite prank was to flip the screen upside down then unplug the keyboard. Good luck saving your work fuck face
-
It often worked poorly as such though. While it worked great as a joystick port. I drew my own conclusions.
Tbf most things worked poorly back then. I constantly had to pop my 386 open and jiggle the ram to get it to boot
-
Tbf most things worked poorly back then. I constantly had to pop my 386 open and jiggle the ram to get it to boot
That's... not typical though.
-
This post did not contain any content.
I'm this old
-
I loved the PCs that had Ctrl + up as a shortcut to flip the monitor orientation. I think it was a Dell thing?
My favourite prank was to flip the screen upside down then unplug the keyboard. Good luck saving your work fuck face
Ok Satan
-
skill issue
I’m pretty sure it doesn’t hot plug for anyone. Yes, even the very skilled.
-
I tried to explain these ports to a salesperson at micro center, and they have me the dull cow stare.
I was looking at some PC's at Best Buy and a salesman came up to try and give me the hard sell. I asked if I could buy the PC without Windows on it for a discount.
"How would you use your computer without Windows on it?"
"I'm going to install Linux"
"What's that?"
"It's an operating system"
Blank stare
"Like Windows or OS X..."
Blank Stare
Sigh "I already have a copy of Windows at home"
"Oh! Well I don't think you can do that, no."
-
I loved the PCs that had Ctrl + up as a shortcut to flip the monitor orientation. I think it was a Dell thing?
My favourite prank was to flip the screen upside down then unplug the keyboard. Good luck saving your work fuck face
I wanna say there’s a Windows hotkey for that now.
-
I tried to explain these ports to a salesperson at micro center, and they have me the dull cow stare.
To be honest, I think that was probably to appropriate response. Information about ps/2 is not really relevant to them or any customer that they are going to help
-
I wanna say there’s a Windows hotkey for that now.
Maybe, but it's just not the same if you can plug your keyboard back in and fix it. CURSE YOU USB
-
IBM sure made naming pretty confusing aren't they?
Not really? I mean it was a whole thing. OS/2, PS/2, I think maybe some PC/2? I can't remember. Anyway it was all branded together.
-
That's... not typical though.
It was. Hardware was absolute trash in the early-mid 90s.
-
I'm this old
Shit. I know what this is. Goddammit.
-
I was always told that you shouldn't (dis)connect a keyboard when it was on because it could short circuit and fry something. This was before USB, of course.
Starting around the time of USB, they started designing plugs so that the parts of the plug that carried power were slightly longer than the parts that carried data so that as you plugged it in, the power connected before the data. That wasn't something that was done with old connectors. In those, everything was the same length, so everything connected at once.
OTOH, USB is a more complicated protocol than the old serial / keyboard protocols. I think generally systems were built well enough that you were unlikely to "fry" something by plugging in or unplugging something like a keyboard while it was running. Especially because the keyboards used low current and low voltage. And computers used big discrete resistors, capacitors, etc. back in those days. But, you could get some bad data on the keyboard line.
-
Starting around the time of USB, they started designing plugs so that the parts of the plug that carried power were slightly longer than the parts that carried data so that as you plugged it in, the power connected before the data. That wasn't something that was done with old connectors. In those, everything was the same length, so everything connected at once.
OTOH, USB is a more complicated protocol than the old serial / keyboard protocols. I think generally systems were built well enough that you were unlikely to "fry" something by plugging in or unplugging something like a keyboard while it was running. Especially because the keyboards used low current and low voltage. And computers used big discrete resistors, capacitors, etc. back in those days. But, you could get some bad data on the keyboard line.
Interesting stuff about the plugs, thanks.
I did quickly fact-check myself after posting and my brief reading suggested that it was possible to break the port, motherboard, or the peripheral, but that it was rare and more likely to cause corruption and/or crashes.
E.g. some anecdata in https://superuser.com/questions/172420/is-it-safe-to-hot-swap-a-ps-2-keyboard and https://electronics.stackexchange.com/questions/50883/why-some-computer-peripherals-should-not-be-disconnected-without-turning-off-thi
-
I remember manually programming the cylinders and heads on a hdd into the bios. Kids these days got it easy
I had a little book with the settings for almost every brand and model of hard drive that existed when published.
-
This post did not contain any content.
I actually wanted a PS2 port because it works with interrupts rather than polling but they aren't really included anymore.
I feel like they don't make boards for people like me who want small boards with a super niche port.
When a MoDT Mini-ITX board comes out with a PS2 port I will buy that instantly
