Open source computer mouse by Ploopy
-
How'd you make the surface this smooth?
wrote last edited by [email protected]Overuse and poor lighting.
I know some people have used an acetone vapor bath with ABS prints. I've never looked into what works with PLA.
-
These jokers are charging $130CAD for a mouse, what in the fuck
It's hand crafted, they probably barely breakeven.
Go ask Logitech if they will share blueprints or spend 0.10$ extra for a button that survives more than 100'000 clicks
-
Overuse and poor lighting.
I know some people have used an acetone vapor bath with ABS prints. I've never looked into what works with PLA.
LOL, makes sense. I'm considering using epoxy. Seems like there's a product that can be brushed on. It fills the gaps. Can be painted if desired.
-
Is it comfortable in the hand? The surface looks super rough
Only as good as your 3d printer and settings I'd say
-
LOL, makes sense. I'm considering using epoxy. Seems like there's a product that can be brushed on. It fills the gaps. Can be painted if desired.
I'd be interested to see how well it works.
-
It's hand crafted, they probably barely breakeven.
Go ask Logitech if they will share blueprints or spend 0.10$ extra for a button that survives more than 100'000 clicks
I have a Logitech from 2003 or so. The feet are gone. The plastic under the feet is rubbed rmooth. The Omron switches are still great, no failure symptoms. Meanwhile I replaced a G500 after couple of years of use due to a switch developing "double-click" from wear. The reason I needed another wired mouse now is that another Logitech developed double-clicking. So yeah, exactly.
-
I'd be interested to see how well it works.
I'll try to remember to post if I end up doing it.
-
These jokers are charging $130CAD for a mouse, what in the fuck
You don't need to pay them anything.
You can just download all the files they've made available and build one yourself. The electronics have full schematics so you can either make it yourself or send the schematics to a PCB company. The shell is entirely 3d printed. All extra hardware is readily available.
If that sounds like a lot of work, maybe it's worth paying the person who created it and is offering to do all that work for you.
-
I needed another corded mouse and this time around I thought of @[email protected] and @[email protected] instead of Logitech's shareholders. These guys make open source mice among other open source hardware under the brand Ploopy. You can order one from them, assembled or as a kit, or you could print and build it entirely by yourself.
The mouse itself is pretty great. Coming from a long line of Logitech (MX518/G5/G500/G502), it's a bit larger than what I'm used to but I think I'm getting accustomed to it.
Here's another shot of it:
How do you like the mouse? I got their trackpad and it's pretty good. I'm thinking about replacing my old Mx Master with their mouse.
-
I have a Logitech from 2003 or so. The feet are gone. The plastic under the feet is rubbed rmooth. The Omron switches are still great, no failure symptoms. Meanwhile I replaced a G500 after couple of years of use due to a switch developing "double-click" from wear. The reason I needed another wired mouse now is that another Logitech developed double-clicking. So yeah, exactly.
I have a 2 year old MX Master 3S, the left click button can't dragndrop anymore without dropping, unless you press really hard on it.
Also I can't rebind the buttons without having Logitech spyware installed on my computer.
Changing the button requires soldering and deep disassembly.
For a 120$USD mouse this sucks ! -
I needed another corded mouse and this time around I thought of @[email protected] and @[email protected] instead of Logitech's shareholders. These guys make open source mice among other open source hardware under the brand Ploopy. You can order one from them, assembled or as a kit, or you could print and build it entirely by yourself.
The mouse itself is pretty great. Coming from a long line of Logitech (MX518/G5/G500/G502), it's a bit larger than what I'm used to but I think I'm getting accustomed to it.
Here's another shot of it:
No left hand options
-
No left hand options
Just turn the printer upside down, dummy!
-
I needed another corded mouse and this time around I thought of @[email protected] and @[email protected] instead of Logitech's shareholders. These guys make open source mice among other open source hardware under the brand Ploopy. You can order one from them, assembled or as a kit, or you could print and build it entirely by yourself.
The mouse itself is pretty great. Coming from a long line of Logitech (MX518/G5/G500/G502), it's a bit larger than what I'm used to but I think I'm getting accustomed to it.
Here's another shot of it:
I want one
-
Overuse and poor lighting.
I know some people have used an acetone vapor bath with ABS prints. I've never looked into what works with PLA.
Just to save the heartache, acetone vapor does not work with pla.
-
I needed another corded mouse and this time around I thought of @[email protected] and @[email protected] instead of Logitech's shareholders. These guys make open source mice among other open source hardware under the brand Ploopy. You can order one from them, assembled or as a kit, or you could print and build it entirely by yourself.
The mouse itself is pretty great. Coming from a long line of Logitech (MX518/G5/G500/G502), it's a bit larger than what I'm used to but I think I'm getting accustomed to it.
Here's another shot of it:
Layer lines, too expensive.
Looks less comfortable than one of those 10~15€ brandless mouses at MediaMarkt
-
All Ploopy's stuff looks rough. I think they're 3D-printing them. Maybe one day they'll progress to something that gives a nicer result.
I was looking at their trackballs but the ambidextrous ones look awkwardly tiny and have rattly bearings, in addition to the rough finish. I support what they're doing but I wish the products were a bit less prototypey.
I think they're 3D-printing them. Maybe one day they'll progress to something that gives a nicer result
Yes they are 3D printed
Poorly 3D printed.
The layering issue could be solved by orienting the object at a 45° angle
-
No left hand options
Most slicers allow you to mirror parts very easily
-
How do you like the mouse? I got their trackpad and it's pretty good. I'm thinking about replacing my old Mx Master with their mouse.
I like it. The surface finish is obviously not as nice as the Logitech, but I like it. I'd probably like it better if it were smooth, which I might try achieving with some epoxy paint. The button feel is great. Better than my G502. Tracking is stellar. The shape is comfortable. The infinite/togglable scroll wheel on the G502 is sonething I wish it had but I can live without it. There's also that special feeling, that someone decent made it, and that it can be infinitely repaired. If it's not a stretch money-wise for you - get one. In the worst case scebario your money would have gone supporting open source hardware.
-
I have a 2 year old MX Master 3S, the left click button can't dragndrop anymore without dropping, unless you press really hard on it.
Also I can't rebind the buttons without having Logitech spyware installed on my computer.
Changing the button requires soldering and deep disassembly.
For a 120$USD mouse this sucks !wrote last edited by [email protected]Using cheap switches on high end stuff like this is just abominable. I'd somewhat understand it on a cheap model but this.. fucking hell.
-
Most slicers allow you to mirror parts very easily
The PCB doesn't look ambidextrous. Maybe there's a way to mirror that too but it's probably not as easy. And you'd have to get it custom built.
