Milliamp-hours per hour
-
This post did not contain any content.
Bros time traveling
-
Furlongs per fortnight.
And an IRL one I encountered, and some one straight facedly expected me to do scientific research in this unit: The Miner's Inch.
Acre-feet as a unit of volume is one I've heard before.
Absolutely cursed unit.
-
Acre-feet as a unit of volume is one I've heard before.
Absolutely cursed unit.
Seems like a useful unit for measuring irrigation water.
-
Seems like a useful unit for measuring irrigation water.
-
Or manure.
Or bullshit.
-
Seems like a useful unit for measuring irrigation water.
Its usually on the purchasing side, and yeah, from that perspective it makes sense, especially in deficit irrigation scenarios.
I take far less issue with acre feet than I do with the miner's inch.
-
This post did not contain any content.
“Honey, can you come down to the bank? I need you to put in your PIN number at the ATM machine, as ASAP as possible!”
-
This post did not contain any content.wrote last edited by [email protected]
mA / h / h => mAh / h^2^
That's one hell of a measurement unit.
Edith: apparently I'm an idiot
-
mA / h / h => mAh / h^2^
That's one hell of a measurement unit.
Edith: apparently I'm an idiot
mAh ≠ mA/h
-
This post did not contain any content.wrote last edited by [email protected]
So this is 510 mA per hour, I guess. That or it just draws 510 mA continuously
-
This post did not contain any content.
How many MPG per gallon does it get per mile, though?
-
Furlongs per fortnight.
And an IRL one I encountered, and some one straight facedly expected me to do scientific research in this unit: The Miner's Inch.
Furlongs per fortnite, but its talking about the file size of the uncompiled source code of the current version.
-
“Honey, can you come down to the bank? I need you to put in your PIN number at the ATM machine, as ASAP as possible!”
No, there's no "per" in mAh.
-
So this is 510 mA per hour, I guess. That or it just draws 510 mA continuously
Not really, it makes sense to give a max current. If a car's top speed is listed as 200 km per hour, it does not mean that it goes this fast continuously.
-
Not really, it makes sense to give a max current. If a car's top speed is listed as 200 km per hour, it does not mean that it goes this fast continuously.
I get this is a battery but the units don’t make sense unless it’s going at 100% all the time
-
So this is 510 mA per hour, I guess. That or it just draws 510 mA continuously
wrote last edited by [email protected]The battery has the storage capacity to pass 510 mA in an hour. If you discharge at half the capacity of 255 mAh (0.5C) it will be empty after 2 hours.
If it was to draw 51 mAh (0.1C) it would last 10 hours.
But if it would draw 1020 mAh (2C) it would only last 30 minutes
-
No, there's no "per" in mAh.
Of course there is, miliAmp per(e) hour,duh.
-
I get this is a battery but the units don’t make sense unless it’s going at 100% all the time
Really? I have a camera that is rated "3.7 V, 2 A" but only draws that amount from the battery when the flash capacitor is recharging. Yes, the normal current draw would be more helpful, and in case of a watch, the standby current.
This may be the charging current but it would be pretty unusual to pick a value slightly above what legacy USB can deliver (500 mA).
-
Of course there is, miliAmp per(e) hour,duh.
You got me there. Congrats.
-
So this is 510 mA per hour, I guess. That or it just draws 510 mA continuously
510mA per hour is nonsensical because A is an instantaneous measurement. 510 mAh/h is 510 mA. I guess you need a backpack to carry the battery around if you want the watch to last all day.
