Milliamp-hours per hour
-
Acre-feet as a unit of volume is one I've heard before.
Absolutely cursed unit.
Seems like a useful unit for measuring irrigation water.
-
Seems like a useful unit for measuring irrigation water.
-
Or manure.
Or bullshit.
-
Seems like a useful unit for measuring irrigation water.
Its usually on the purchasing side, and yeah, from that perspective it makes sense, especially in deficit irrigation scenarios.
I take far less issue with acre feet than I do with the miner's inch.
-
This post did not contain any content.
“Honey, can you come down to the bank? I need you to put in your PIN number at the ATM machine, as ASAP as possible!”
-
This post did not contain any content.wrote last edited by [email protected]
mA / h / h => mAh / h^2^
That's one hell of a measurement unit.
Edith: apparently I'm an idiot
-
mA / h / h => mAh / h^2^
That's one hell of a measurement unit.
Edith: apparently I'm an idiot
mAh ≠ mA/h
-
This post did not contain any content.wrote last edited by [email protected]
So this is 510 mA per hour, I guess. That or it just draws 510 mA continuously
-
This post did not contain any content.
How many MPG per gallon does it get per mile, though?
-
Furlongs per fortnight.
And an IRL one I encountered, and some one straight facedly expected me to do scientific research in this unit: The Miner's Inch.
Furlongs per fortnite, but its talking about the file size of the uncompiled source code of the current version.
-
“Honey, can you come down to the bank? I need you to put in your PIN number at the ATM machine, as ASAP as possible!”
No, there's no "per" in mAh.
-
So this is 510 mA per hour, I guess. That or it just draws 510 mA continuously
Not really, it makes sense to give a max current. If a car's top speed is listed as 200 km per hour, it does not mean that it goes this fast continuously.
-
Not really, it makes sense to give a max current. If a car's top speed is listed as 200 km per hour, it does not mean that it goes this fast continuously.
I get this is a battery but the units don’t make sense unless it’s going at 100% all the time
-
So this is 510 mA per hour, I guess. That or it just draws 510 mA continuously
wrote last edited by [email protected]The battery has the storage capacity to pass 510 mA in an hour. If you discharge at half the capacity of 255 mAh (0.5C) it will be empty after 2 hours.
If it was to draw 51 mAh (0.1C) it would last 10 hours.
But if it would draw 1020 mAh (2C) it would only last 30 minutes
-
No, there's no "per" in mAh.
Of course there is, miliAmp per(e) hour,duh.
-
I get this is a battery but the units don’t make sense unless it’s going at 100% all the time
Really? I have a camera that is rated "3.7 V, 2 A" but only draws that amount from the battery when the flash capacitor is recharging. Yes, the normal current draw would be more helpful, and in case of a watch, the standby current.
This may be the charging current but it would be pretty unusual to pick a value slightly above what legacy USB can deliver (500 mA).
-
Of course there is, miliAmp per(e) hour,duh.
You got me there. Congrats.
-
So this is 510 mA per hour, I guess. That or it just draws 510 mA continuously
510mA per hour is nonsensical because A is an instantaneous measurement. 510 mAh/h is 510 mA. I guess you need a backpack to carry the battery around if you want the watch to last all day.
-
This post did not contain any content.
Wouldnt that just translate back to it drawing 510ma of current? If you use 510mah in an hour that means you are drawing 510ma of current. That also means for all day battery life you would need a 8000mah battery at least which would make quite the chunky watch lol.
-
No, the safeword is "0.002 cents"
That's the safe safeword.
