Are there any common household items or products that you think are designed incredibly poorly?
-
Spray on condom
-
Lightly coat the spout with olive oil
-
Soak them in vinegar for 15 minutes
-
The cap is a scam, it used to be the size of a soda bottles; now it's a literal cup.
you don't need to measure laundry liquid anyway,
just put the absolute minimum amount you can pour from the bottle directly in the machine and do 2 or 3 loads.
-
I have to chime in here, as it's a subject close to my heart. The old Pyrex measuring cups don't do this. I went out of my way to buy some on eBay. I can't imagine why they redesigned like this, but there's a lot of things I can't imagine.
-
Water has both adhesive and cohesive properties, and this bullshit is one of the results. I hate it so much. Basically the bit of wwater in contact with the surface of the spout likes to stick to that spot; and the above that likes to stick to the water stuck to the surface and so on, making it kinda roll along angled surfaces even when it seems like gravity should be yanking it right off.
And they absolutely could shape the spout in a way that stops this - they just choose not to.
Never heard of the oil coating trick @DontRedditMyLemmy mentioned, but it makes sense - oil is hydrophobic, so that could eliminate the adhesion part of the equation; and without that moving the stream initially, its cohesion won't be an issue either.
-
Why the hell do i have to know which way to put the batteries in at this point ?
-
I’m incredibly confused about how you’re supposedly to measure liquid laundry detergent with the cap.
You just gave me a stupid idea. First measure out the exact volume of detergent you need for one load - eyeballing it I'd guess 20mL (I'm notoriously terrible at eyeballing volume, so, grain of salt) - then get a 20mL syringe and some IV tubing (it's got one-way valves, so when you connect a syringe to it and draw up, it pulls from on side of the line; then when you depress the syringe back down, it goes out the other side). Tie something heavy to the intake side of the line and throw it in the bucket of detergent. Run the other side of the line to just above the detergent receptacle if your machine has one; or near the door for you to just aim it.
Load clothes; pull syringe, push syringe, close the door, run the machine. No detergent dripping all over the place!
...detergent is probably too viscous as-is to go through IV tubing at an acceptable rate, so you'd probably have to dilute it with water first to thin it out, then adjust the amount you pull accordingly.
-
I stick mine to the side of the fridge with old hard drive magnets when not in use.
-
Some toilets have a perfectly round bowl so they don't stick out as far and take up bathroom floor space - and they work fine, but only in bathrooms that anticipate the vast majority of its occupants to be equipped with a vagina. For those of us rocking a penis, those fucking toilets are horrible - sitting on that damn thing requires you to contort your junk around like some sausage-Houdini as you're sitting, so that you can guide it through the remaining 2 square inches of open space not occupied by your legs or ass. Then when you're actually seated, you still have to sit there and awkwardly hold the thing so it stays pointed straight down.
Fuck up any part of that, and the tip of your dick hits the seat or the inside of the bowl.
...and they must be like $3 cheaper than an oval toilet or something, cuz 99% of US apartments seem to be equipped with the round, vagina-only toilets.
Oval bowls are the way. No matter what's in your pants, it gets the job done without the significantly increased biohazard risk.
I guess in fairness, the problem isn't with their design, it's with the people who purchase the toilets treating them as sex-neutral when no the fuck they aren't!
-
Fred, is that you?
-
Most clothes, oddly gendered and sexist and it's fucking weird having different clothes for people who identify differently, like clothes are clothes. Make them for everyone. It's fucking wild.
-
Yeah women's socks don't make sense to me. They're socks. Why are they gendered?
-
no pockets
-
Oh wow, those really exist
-
The new caps they're putting on plastic bottles are awful. Make it very hard to put back on properly and we've have a few incidents with them looking on but they actually cross threaded and leaked. I just rip them off now.
Also, why is the glue on cereal boxes so damn strong now? I end up tearing the box more often than not these days and that never used to be the case.
-
permanently installed lamps with a socketed power supply that sticks like 10cm out of the wall.
-
I hate those.
Sit where it is comfortable and you touch the front, fucken gross, or sit back far enough and stain the bowl.
-
My oven’s vents point directly up my face. So when you stand in front of the stovetop while baking something, you’re directly exposed to the fumes of burning gas.
-
Overtime, our kitchen knives. Knives need to be thin, as thinner knives cut through ingredients more easily. Today's knives are designed instead to be marketed. Something incredibly thick, and sturdy, to make it feel "premium", when all its doing is tiring you out, since using a heavy knife gets exhausting, especially when its so thick it wedges in ingredients.
Vintage European knives are slim, and almost petite, because they knew how to make a good knife, in the same manner japanese knives are ground extremely thin, sometimes thinner than a postcard.
