Are there any common household items or products that you think are designed incredibly poorly?
-
Thankfully, there are some designs that improve on this! Here’s what’s in my kitchen:
The brand is OXO.
I have that and they still are a removed to get in or out of a crowded tool jar. Then I always bump that end switch and they pop open in the jar.
-
For example, I'm incredibly confused about how you're supposedly to measure liquid laundry detergent with the cap. At least the kind that I have sits on it's side, so if you measure it with the cap it just leaks everywhere and makes a mess.
Or at my parents house they have a bag of captain crunch berries that has a new design, where instead of zipping along the top of the bag like normal, it has a zipper in the front slightly beneath the top. That way when you poor it you can't see what you're doing cuz the bag is in the way. Like what the heck who's idea was that?
Wine bottles. After thousands of years of drinking you would think humans would develop a bottle design that doesn't dribble down the side after pouring.
-
Tape a dildo to your vulva now sit down on a round bowl and see if it touches the rim. Now imagine you have to pee while taking a poop and you now have to shove the end down so it pees into the bowl. Do this without touching the rim.
It was the shape of the toilet what I couldn't picture, not the usage
-
Light bulbs! I thought when we moved away from the traditional incandescent the new stuff was supposed to last forever. Why do they die all the time!?
When I replaced a set the other day I learned that some of them are not rated for enclosures
-
Light bulbs! I thought when we moved away from the traditional incandescent the new stuff was supposed to last forever. Why do they die all the time!?
It's usually the electronic drivers. They overoverheat and degrade. Most burned LED bulbs still have working LEDs and just need to replace some component of the driver board.
-
A lot of OTC meds that are in boxes have annoying packaging where you have to peel off the little paper before you can push the pill through the wrapping. The paper doesn't always like to peel off properly and it makes it harder to get the pill out of the packaging.
I always thought this was super on purpose. Is it not intentional design for “child protection?”
-
Light bulbs! I thought when we moved away from the traditional incandescent the new stuff was supposed to last forever. Why do they die all the time!?
It's usually because of cheap electrolytic capacitors. Letting a $10+ item die because they were too cheap to pay $0.25 instead of $0.15 for a properly rated component.
-
No one asked for the spork
I dont think I've ever seen a spork with teeth that could actually pick up food like a fork, so it's just a bad spoon.
-
Light bulbs! I thought when we moved away from the traditional incandescent the new stuff was supposed to last forever. Why do they die all the time!?
thanks capitalism
-
I've always thought that most toilet paper holders are over engineered. You don't need a little springy rod between 2 posts, you just need an L-shaped bar with the short end screwed to the wall and maybe a little knob on the end of the long side to keep the roll from sliding off. And it's not that the spring style is especially difficult to use or prone to failure or anything, it just seems like a no-brainer to me to use a one-piece holder with no moving parts instead of one that has at least 4 parts (the base, 2 halves of the roller, and a spring) I'm seeing more of that style around these days, which I appreciate.
Stove vent hoods that don't actually vent outside are fucking stupid. My over the range microwave basically just takes smoke from my stove and blows it back out over my head almost directly at the smoke detector.
I've frequently run into shelves, mounting brackets, etc. that seem to totally disregard stud spacing. We got one of those fancy Samsung frame TV's a while back, to get it to sit so flush to the wall it has its own special mounting brackets, 2 little plates with sort of a modified keyhole slot that you slot 2 little knobs on the back of the TV into. It's actually not a half bad way to mount a TV, probably one of the easier TV wall mounts I've ever personally used, the tv itself is actually pretty damn lightweight (because they moved all the heavy electronics into a separate box you need to hide somewhere) but still I wanted to make sure my fancy TV wouldn't fall off the wall, so I wanted to mount it to the studs, but of course the spacing of the brackets doesn't allow that option. I was able to bolt one side a stud but I had to get some toggle bolts for the other side. I'm pretty sure the whole TV is well within the rated weight capacity of one of those toggle bolts in drywall, let alone 2 in drywall and 2 in a stud, but still, it feels like a dumb design choice. (It's possible that other sizes or newer models do allow for mounting entirely to studs, the size and model I got didn't)
I helped a friend replace the wax ring on his toilet recently with one of the newer style rubber gaskets, which as it turns out made the toilet sit imperceptibly higher, which meant that the bolts holding it down were no longer quite long enough to screw the nut onto to tighten it down. With a quick trip to ace hardware and a minute perusing my options, I settled on some Danco zero cut bolts, and I definitely think that is a far superior design to the standard bolts that are probably holding down damn-near every toilet you've ever used.
On the subject of toilets, I can't think of any particularly good reason for the tank to be a separate piece from the rest of the throne like on most toilets. The gasket and bolts there just add more places for something to start leaking. It's probably an ease of manufacturing thing, but we have the technology to make one piece toilets now, the two piece style should be obsolete.
The two piece toilet does make installation a bit easier since it's less weight. I wonder if there are any sort of workplace safety weight limit considerations that come into play. E.g., maybe the 2 piece can be done with 1 person, but a one piece could need 2.
-
Those ridiculous new caps on plastic bottles are awful. They only lead to wastage as it's difficult for most people to reseal them properly and anything carbonated gets wasted. Tagging the lid to the bottle is not a world-saving solution for recycling.
Not to be annoying but I actually carry a nice steel thermos with me and pour anything I might drink into the thermos.
It only feels like a hassle the first time. You get a steel thermos with a steel straw and now you're really cooking with gas.
-
No one asked for the spork
I love sporks. If you find the right model they are the ultimate eating utensil.
-
This is so you can put them up on your sholder. Well some that arnt jank.
Yeah, I'd say the opposite; I hate the ones with short, little handles.
-
For example, I'm incredibly confused about how you're supposedly to measure liquid laundry detergent with the cap. At least the kind that I have sits on it's side, so if you measure it with the cap it just leaks everywhere and makes a mess.
Or at my parents house they have a bag of captain crunch berries that has a new design, where instead of zipping along the top of the bag like normal, it has a zipper in the front slightly beneath the top. That way when you poor it you can't see what you're doing cuz the bag is in the way. Like what the heck who's idea was that?
Everyone seems to have a cup plunger for sinksnext to their toilet instead of a toilet plunger near their toilet.
A toilet plunger has flanges:
I have seen this plunger close to zero times when visiting people and using their bathroom.
-
For example, I'm incredibly confused about how you're supposedly to measure liquid laundry detergent with the cap. At least the kind that I have sits on it's side, so if you measure it with the cap it just leaks everywhere and makes a mess.
Or at my parents house they have a bag of captain crunch berries that has a new design, where instead of zipping along the top of the bag like normal, it has a zipper in the front slightly beneath the top. That way when you poor it you can't see what you're doing cuz the bag is in the way. Like what the heck who's idea was that?
Toilets seem to be getting smaller and I’m having trouble sitting on it without my penis touching the front.
-
Overtime, our kitchen knives. Knives need to be thin, as thinner knives cut through ingredients more easily. Today's knives are designed instead to be marketed. Something incredibly thick, and sturdy, to make it feel "premium", when all its doing is tiring you out, since using a heavy knife gets exhausting, especially when its so thick it wedges in ingredients.
Vintage European knives are slim, and almost petite, because they knew how to make a good knife, in the same manner japanese knives are ground extremely thin, sometimes thinner than a postcard.
Anyone got good knife recommendations I'm in the market right now??
General purpose for meats and veggie cutting.
I'm currently using a victorinox fibrox. It's great but loses edge rather quickly requiring honing each meal and sometimes during cutting of ingredients.
-
Space consideration is a bit more obvious with the seat though
Round bowls with larger circumference is the clear winner. Elongated bowls also leave stains easier.
-
For example, I'm incredibly confused about how you're supposedly to measure liquid laundry detergent with the cap. At least the kind that I have sits on it's side, so if you measure it with the cap it just leaks everywhere and makes a mess.
Or at my parents house they have a bag of captain crunch berries that has a new design, where instead of zipping along the top of the bag like normal, it has a zipper in the front slightly beneath the top. That way when you poor it you can't see what you're doing cuz the bag is in the way. Like what the heck who's idea was that?
Countertops should be just a couple of inches higher, they are calibrated for a 1930s housewife but most of us aren't 5'2" and it's easier to stand on a stool if it's too high than to stoop because it's too low.
OP I hate those low ziploc bag openings too, they are so stupid.
-
I have no idea if you're a man or a woman, but I'm guessing based on your comment, you're a man? You're talking about those hooks/ indents like halfway between the hook and the end of the hanger? I think those are a lot more useful on women's clothes, which tend to have much wider necks which means they just slip right off hangers. The hooks help wide neck blouses and jackets stay on the hangers, and they're especially useful for tank top or spaghetti strap type tops and dresses.
-
I've always thought that most toilet paper holders are over engineered. You don't need a little springy rod between 2 posts, you just need an L-shaped bar with the short end screwed to the wall and maybe a little knob on the end of the long side to keep the roll from sliding off. And it's not that the spring style is especially difficult to use or prone to failure or anything, it just seems like a no-brainer to me to use a one-piece holder with no moving parts instead of one that has at least 4 parts (the base, 2 halves of the roller, and a spring) I'm seeing more of that style around these days, which I appreciate.
Stove vent hoods that don't actually vent outside are fucking stupid. My over the range microwave basically just takes smoke from my stove and blows it back out over my head almost directly at the smoke detector.
I've frequently run into shelves, mounting brackets, etc. that seem to totally disregard stud spacing. We got one of those fancy Samsung frame TV's a while back, to get it to sit so flush to the wall it has its own special mounting brackets, 2 little plates with sort of a modified keyhole slot that you slot 2 little knobs on the back of the TV into. It's actually not a half bad way to mount a TV, probably one of the easier TV wall mounts I've ever personally used, the tv itself is actually pretty damn lightweight (because they moved all the heavy electronics into a separate box you need to hide somewhere) but still I wanted to make sure my fancy TV wouldn't fall off the wall, so I wanted to mount it to the studs, but of course the spacing of the brackets doesn't allow that option. I was able to bolt one side a stud but I had to get some toggle bolts for the other side. I'm pretty sure the whole TV is well within the rated weight capacity of one of those toggle bolts in drywall, let alone 2 in drywall and 2 in a stud, but still, it feels like a dumb design choice. (It's possible that other sizes or newer models do allow for mounting entirely to studs, the size and model I got didn't)
I helped a friend replace the wax ring on his toilet recently with one of the newer style rubber gaskets, which as it turns out made the toilet sit imperceptibly higher, which meant that the bolts holding it down were no longer quite long enough to screw the nut onto to tighten it down. With a quick trip to ace hardware and a minute perusing my options, I settled on some Danco zero cut bolts, and I definitely think that is a far superior design to the standard bolts that are probably holding down damn-near every toilet you've ever used.
On the subject of toilets, I can't think of any particularly good reason for the tank to be a separate piece from the rest of the throne like on most toilets. The gasket and bolts there just add more places for something to start leaking. It's probably an ease of manufacturing thing, but we have the technology to make one piece toilets now, the two piece style should be obsolete.
Stove vent hoods that don’t actually vent outside are fucking stupid. My over the range microwave basically just takes smoke from my stove and blows it back out over my head almost directly at the smoke detector.
Amen. The one non-negotiable item when we eventually renovate our kitchen is a vent fan so powerful you should be afraid to bring your small dog into the kitchen when it's on.
We had one of those downdraft ones and it was similarly useless, worse than useless even though it technically vented outside because it got so disgusting, the vent grate right in the middle of the stove so things fell in, and heat doesn't go down, it didn't pull anything when it ran.
