When building a home server, could a used/cheap PC do the job?
-
There are advantages to getting server-grade hardware. It’s designed to run 24/7, often supports more hard drives, ram sticks, processors, etc, and often is designed to make it very quick to replace things when they break.
You can find used servers on sites like EBay for reasonable prices. They typically come from businesses selling their old hardware after an upgrade.
However, for simple home use cases, an old regular desktop PC will be just fine. Run it until it breaks!
LabGopher extracts information from active eBay listings to help you easily find the right hardware for your needs.
-
I've never done any sort of home networking or self-hosting of any kind but thanks to Jellyfin and Mastodon I've become interested in the idea. As I understand it, physical servers ("bare metal" correct?) are PCs intended for data storing and hosting services instead of being used as a daily driver like my desktop. From my (admittedly) limited research, dedicated servers are a bit expensive. However, it seems that you can convert an old PC and even laptop into a server (examples here and here). But should I use that or are there dedicated servers at "affordable" price points. Since is this is first experience with self-hosting, which would be a better route to take?
My home server is made of literal garbage.
-
How does the a380 impact your power consumption? If you have ever measured it.
I’d imagine not very much. I don’t know how to measure just the GPU. It doesn’t have any desktop installed, so it’s only ever rendering a console. It can transcode tons of 1080p streams at once, so even a transcode probably doesn’t draw much power. The CPU is the hungriest part, and that’s mostly idling too.
-
There are advantages to getting server-grade hardware. It’s designed to run 24/7, often supports more hard drives, ram sticks, processors, etc, and often is designed to make it very quick to replace things when they break.
You can find used servers on sites like EBay for reasonable prices. They typically come from businesses selling their old hardware after an upgrade.
However, for simple home use cases, an old regular desktop PC will be just fine. Run it until it breaks!
Yes, but if you care about power efficiency then they really aren't a great option. Most professional server hardware that you can get for a decent price uses significantly more power than an old mini computer or a cheap N100 PC. I own a proliant but rarely power it on due to the fact that I could rent an similarly performant VPS for 2x the power bill. Besides that many server CPU's don't have integrated GPU's and will require additional hardware if you want to run something like Jellyfin.
-
I've never done any sort of home networking or self-hosting of any kind but thanks to Jellyfin and Mastodon I've become interested in the idea. As I understand it, physical servers ("bare metal" correct?) are PCs intended for data storing and hosting services instead of being used as a daily driver like my desktop. From my (admittedly) limited research, dedicated servers are a bit expensive. However, it seems that you can convert an old PC and even laptop into a server (examples here and here). But should I use that or are there dedicated servers at "affordable" price points. Since is this is first experience with self-hosting, which would be a better route to take?
Old PC's and especially laptops (make sure to consider removing the battery though) make great homeservers. You can run dozens of services on old hardware.
-
I've never done any sort of home networking or self-hosting of any kind but thanks to Jellyfin and Mastodon I've become interested in the idea. As I understand it, physical servers ("bare metal" correct?) are PCs intended for data storing and hosting services instead of being used as a daily driver like my desktop. From my (admittedly) limited research, dedicated servers are a bit expensive. However, it seems that you can convert an old PC and even laptop into a server (examples here and here). But should I use that or are there dedicated servers at "affordable" price points. Since is this is first experience with self-hosting, which would be a better route to take?
I started with handmedowns donated to my by someone from mastodon that was getting rid of junk computers. All tiny think stations.
-
I've never done any sort of home networking or self-hosting of any kind but thanks to Jellyfin and Mastodon I've become interested in the idea. As I understand it, physical servers ("bare metal" correct?) are PCs intended for data storing and hosting services instead of being used as a daily driver like my desktop. From my (admittedly) limited research, dedicated servers are a bit expensive. However, it seems that you can convert an old PC and even laptop into a server (examples here and here). But should I use that or are there dedicated servers at "affordable" price points. Since is this is first experience with self-hosting, which would be a better route to take?
I use my previous desktop and a rando openbox thinclient I picked up at Bestbuy for like $250 in a proxmox cluster. The desktop does the heavy lifting on stuff like jellyfin transcoding, immich ML, or just general fucking about with things that require a more powerful GPU (got a 3080ti in there)
The thinclient handles all the lighter stuff that needs to be constantly available, like my traefik instance, dns/dhcp server, etc
-
Any normal computer can become a "server", its all based on the software.
Most enterprise server hardware is expensive because its designed around demanding workloads where uptime and redundancy is important. For a goober wanting to start a Minecraft and Jellyfin server, any old PC will work.
For home labbers office PC's is the best way to do it. I have two machines right now that are repurposed office machines. They usually work well as office machines generally focus on having a decent CPU and plenty of memory without wasting money on a high end GPU, and can be had used for very cheap (or even free if you make friends that work in IT). And unless you're running a lot of game servers or want a 4k streaming box, even a mediocre PC from 2012 is powerful enough to do a lot of stuff on.Totally agree, I'll add that I run jellyfin, the *arrs, an admittedly low throughout ripping/encoding setup, and a few other containers on a single optiplex micro 7060 and there's a lot of room leftover. I very much appreciate the laptop processor in it because it usually sits idle for 16 hours a day.
-
I've never done any sort of home networking or self-hosting of any kind but thanks to Jellyfin and Mastodon I've become interested in the idea. As I understand it, physical servers ("bare metal" correct?) are PCs intended for data storing and hosting services instead of being used as a daily driver like my desktop. From my (admittedly) limited research, dedicated servers are a bit expensive. However, it seems that you can convert an old PC and even laptop into a server (examples here and here). But should I use that or are there dedicated servers at "affordable" price points. Since is this is first experience with self-hosting, which would be a better route to take?
Anything you need to buy is more expensive than anything you already have.
Especially if youre worried about power costs.
Reuse wha you have, replace when you need to.
-
I've never done any sort of home networking or self-hosting of any kind but thanks to Jellyfin and Mastodon I've become interested in the idea. As I understand it, physical servers ("bare metal" correct?) are PCs intended for data storing and hosting services instead of being used as a daily driver like my desktop. From my (admittedly) limited research, dedicated servers are a bit expensive. However, it seems that you can convert an old PC and even laptop into a server (examples here and here). But should I use that or are there dedicated servers at "affordable" price points. Since is this is first experience with self-hosting, which would be a better route to take?
My server is always my old desktop hardware. It's a 4th-gen i5 with 16GB RAM and it's keeping up fine. I have thrown quite a lot of work at it too. If you avoid containers, you can serve 20 services off it no problem.
I too, was worried about power costs. Every time I do the maths, the new hardware will be obsolete by the time I make the money back in savings. If you're concerned about environmental impact, the initial manufacture of hardware does more damage than running it over its lifetime.
Dedicated (1U rackmount) servers are always loud and power-hungry. I they idle at 130w and sound like a hairdryer that's been left on.
Find secondhand on Facebook marketplace. Dive into an e-waste bin if you have to.
-
Old PC's and especially laptops (make sure to consider removing the battery though) make great homeservers. You can run dozens of services on old hardware.
Leave the battery in and you have a free UPS. Perhaps set it capped at 80% charge to increase its lifespan.
-
You definitely want an 8th gen (Intel) or better to have Jellyfin Quick Sync support. It's what I have (i5-8400T) and it offer a fairly decent AVC (h264) and HEVC (h265) transcoding for my usage. However, for futur proofing consider an 11th gen for the AV1 support.
Thanks for specifying. You are correct, and that is exactly the CPU I have in my SFF, too.
-
S [email protected] shared this topic on
-
I’d imagine not very much. I don’t know how to measure just the GPU. It doesn’t have any desktop installed, so it’s only ever rendering a console. It can transcode tons of 1080p streams at once, so even a transcode probably doesn’t draw much power. The CPU is the hungriest part, and that’s mostly idling too.
Thank you!
-
I've never done any sort of home networking or self-hosting of any kind but thanks to Jellyfin and Mastodon I've become interested in the idea. As I understand it, physical servers ("bare metal" correct?) are PCs intended for data storing and hosting services instead of being used as a daily driver like my desktop. From my (admittedly) limited research, dedicated servers are a bit expensive. However, it seems that you can convert an old PC and even laptop into a server (examples here and here). But should I use that or are there dedicated servers at "affordable" price points. Since is this is first experience with self-hosting, which would be a better route to take?
If you aren't worried about power costs, yes, it's worth it.
I calculated the power cost required to run a 100w PC 24/7 for 2 years, equals a new mini PC. So I just bought a NUC which draws 7-8W. Less noisy too.
-
I've never done any sort of home networking or self-hosting of any kind but thanks to Jellyfin and Mastodon I've become interested in the idea. As I understand it, physical servers ("bare metal" correct?) are PCs intended for data storing and hosting services instead of being used as a daily driver like my desktop. From my (admittedly) limited research, dedicated servers are a bit expensive. However, it seems that you can convert an old PC and even laptop into a server (examples here and here). But should I use that or are there dedicated servers at "affordable" price points. Since is this is first experience with self-hosting, which would be a better route to take?
Let’s put it this way, I’m hosting about 30 Docker containers including a full Servarr stack, Jellyfin, and Mastodon on an old Dell workstation intended for office work.
-
There are advantages to getting server-grade hardware. It’s designed to run 24/7, often supports more hard drives, ram sticks, processors, etc, and often is designed to make it very quick to replace things when they break.
You can find used servers on sites like EBay for reasonable prices. They typically come from businesses selling their old hardware after an upgrade.
However, for simple home use cases, an old regular desktop PC will be just fine. Run it until it breaks!
While yes, there is a reason why I have retired the Dell server I had for a normal desktop PC. The server was so loud, I could hear it two stairs and two closed doors away.
-
While yes, there is a reason why I have retired the Dell server I had for a normal desktop PC. The server was so loud, I could hear it two stairs and two closed doors away.
I was able to quiet mine with a bash script until eventually a software update changed the fan control to keep it quiet for me.
-
I love the vibe in this thread/community. You all seem like real cool cats. I appreciate that.
Absolutely, this is great. Knowledgeable people being reasonable.
-
I've never done any sort of home networking or self-hosting of any kind but thanks to Jellyfin and Mastodon I've become interested in the idea. As I understand it, physical servers ("bare metal" correct?) are PCs intended for data storing and hosting services instead of being used as a daily driver like my desktop. From my (admittedly) limited research, dedicated servers are a bit expensive. However, it seems that you can convert an old PC and even laptop into a server (examples here and here). But should I use that or are there dedicated servers at "affordable" price points. Since is this is first experience with self-hosting, which would be a better route to take?
I'm running my Proxmox VE on a small asus mini pc with embedded cpu. It can't even match a 5 year old i3 and I'm having no issues.
Running mainly containers and small projects
-
I've never done any sort of home networking or self-hosting of any kind but thanks to Jellyfin and Mastodon I've become interested in the idea. As I understand it, physical servers ("bare metal" correct?) are PCs intended for data storing and hosting services instead of being used as a daily driver like my desktop. From my (admittedly) limited research, dedicated servers are a bit expensive. However, it seems that you can convert an old PC and even laptop into a server (examples here and here). But should I use that or are there dedicated servers at "affordable" price points. Since is this is first experience with self-hosting, which would be a better route to take?
This was maybe 2-3ish years ago;
I started with a raspberry pi 4 bundle from Amazon, played around with the Linux filesystem, bash shell, APT package manager and just kept reinstalling the headless Debian 12 OS if I believed to have bricked it beyond repair.
Eventually learned about the Docker Engine & Docker Compose and that essentially gave access to a plethora of software I would’ve have never have used before.
The raspberry pi 4 started to show sluggishness as I started piling more and more services on it so, Instead of buying traditional server grade hardware I liked the small form factor of the Pi so I opted for a 13th gen Asus Nuc with an 12 core i7.
Everything runs beautifully now and I even run Debian 12 on my desktop as well!
