Long Island man wearing 9kg-metal necklace dies after being sucked into MRI machine
-
Dude was wearing a 20lb chain while his wife was getting an MRI.
She freaked, and yelled for him, and he ran into the room while the machine was still on and fucking died.
This is 100% their fault, I could almost see an argument that the door needs a lock to prevent idiots with 20l s of metal around their neck from running in, but you don't want to lock everyone out in case there's an issue.
wrote last edited by [email protected]His wife told News 12 Long Island in a recorded interview that she was undergoing an MRI on her knee when she asked the technician to get her husband to help her get off the table. She said she called out to him.
Where does it say he ran in? I mean, what you say sounds right, but this doesn't read like "freaking out"
Edit: Sounds like she did not freak out, but called to him to help her stand up after it was complete (bad knee), but before he was authorized to enter. This seems more like an honest mistake and tragedy. https://www.cnn.com/2025/07/20/health/mri-machine-death-long-island
-
This post did not contain any content.
So glad to find that Lemmy is even less empathetic than reddit was. Real faith in humanity killer. Shocking how many people decided to comment without touching the article, really proud to be here..
-
I doubt it, obviously depending on the applied force.
Skin is rather tough to rip with a blunt tool so yeah, maybe the head was disconnected from the spine immediately, making him look like a giraffe spinning at 12 RPM round and round.
Honestly fuck this website
-
This post did not contain any content.
Surely 9kg necklace isn't something you can just sneak around with, how was he allowed to get close enough to an MRI machine in the first place wearing it?
-
This post did not contain any content.
The man, 61, had entered the MRI room while a scan was underway
How was that allowed?
he asked the technician to get her husband to help her get off the table.
...while the machine was still working? And isn't that the job of the technician anyway?
the technician helped her try to pull her husband off the machine but it was impossible.
Those machines have a kill-switch for a reason.
I call this BS or a very incompetent technician.
Plus a Darwin award for the guy. -
His wife told News 12 Long Island in a recorded interview that she was undergoing an MRI on her knee when she asked the technician to get her husband to help her get off the table. She said she called out to him.
Whole thing is heart breaking all around. I feel for the technician who made an honest but very serious mistake. And I'm sure the wife will spend her days regretting asking for help. Just a fucking tragic situation.
the technician who made an honest but very serious mistake.
You mean letting someone in while the machine was in operation?
-
all they needed was a magnet of equal or greater strength
MRI magnets are electromagnets that are supercooled with liquid helium and take hours to start or stop because of the electrical energy that has to be put in or taken out.
So just having a magnet of equal strengh for idiot defense would be a very significant waste of electricity and helium unfortunately
take hours to start or stop
You mean they're in constant operation the whole shift?
Surely dialed way down in between scans? -
So many dumb ways to die...
Another Darwin award.
-
Just for your information, the machine, meaning the magnet, is ALWAYS on.
Surely dialed down in between scans?
-
while the machine was running?
In an MRI, the magnet is always on, even when the machine isn't running. You can't ever go near it with metal on.
the magnet is always on,
I keep seeing that in the comments but isn't it actually an electromagnet?
Don't those need electricity to operate?I get it takes time to wind it up, been inside a few myself, but surely there's a kill switch?
-
Another Darwin award.
Only if he didn't have kids.
-
Did no one else read the story? I read it and it sounds moreso the clinic's fault
The necklace he was wearing was a steel weighted exercise band, not a normal necklace. He's not flexing his wealth or anything
His wife told News 12 Long Island in a recorded interview that she was undergoing an MRI on her knee when she asked the technician to get her husband to help her get off the table. She said she called out to him.
Seems like the technician was told by the wife to bring her husband in to help her up. The technician/clinic made a mistake by letting in the husband, who didn't seem properly warned about MRIs no metal policy. The technician also somehow didn't catch the giant "necklace" he'd be wearing.
The "he wasn't supposed to be there" seems like a coverup for their mistake, since how else would he have known to go in? Someone must've told him to walk into the room, it's not like he could hear through the door.
Edit:
100% the technicians fault, the technician saw it. It even had a metal padlock.They’d even discussed his training and the hard-to-miss chain with the MRI technician during their previous appointments, Jones-McAllister said.
“That was not the first time that guy has seen that chain” on her husband, she said. “They had a conversation about it before.”Why even wear the stupid necklace when going to the MRI in the first place? Like, how thoughtless and selfish can you be? Always assume you are surrounded by barely-functional morons, especially in the medical field which seems to attract these types of people, and think defensively.
"Geez, I'm going to be near an MRI machine, maybe I'll wear a 20 pound piece of steel around my neck? Genius! Let's do it!"
-
This post did not contain any content.
9 kilograms Necklace?! What kind of necklace is that?
-
This post did not contain any content.wrote last edited by [email protected]
He didn't see the new Final Destination movie.
-
The man, 61, had entered the MRI room while a scan was underway
How was that allowed?
he asked the technician to get her husband to help her get off the table.
...while the machine was still working? And isn't that the job of the technician anyway?
the technician helped her try to pull her husband off the machine but it was impossible.
Those machines have a kill-switch for a reason.
I call this BS or a very incompetent technician.
Plus a Darwin award for the guy.Couple things:
The magnet is ALWAYS on.
The "kill switch" takes about five minutes to actually deactivate the magnet and it costs about thirty grand in helium every time you push it.
-
Couple things:
The magnet is ALWAYS on.
The "kill switch" takes about five minutes to actually deactivate the magnet and it costs about thirty grand in helium every time you push it.
Isn't it an electomagnet?
it costs about thirty grand in helium every time you push it.
Oh, right, i forgot human lives have a price in the US.
-
Surely dialed down in between scans?
No it is only turned off during maintenance or by an emergency kill switch.
-
the magnet is always on,
I keep seeing that in the comments but isn't it actually an electromagnet?
Don't those need electricity to operate?I get it takes time to wind it up, been inside a few myself, but surely there's a kill switch?
It would probably be quicker for you to look it up yourself because the answer is complicated to explain. But it's an electromagnet made from superconducting materials, and that is why it seems to violate your common sense.
-
Did no one else read the story? I read it and it sounds moreso the clinic's fault
The necklace he was wearing was a steel weighted exercise band, not a normal necklace. He's not flexing his wealth or anything
His wife told News 12 Long Island in a recorded interview that she was undergoing an MRI on her knee when she asked the technician to get her husband to help her get off the table. She said she called out to him.
Seems like the technician was told by the wife to bring her husband in to help her up. The technician/clinic made a mistake by letting in the husband, who didn't seem properly warned about MRIs no metal policy. The technician also somehow didn't catch the giant "necklace" he'd be wearing.
The "he wasn't supposed to be there" seems like a coverup for their mistake, since how else would he have known to go in? Someone must've told him to walk into the room, it's not like he could hear through the door.
Edit:
100% the technicians fault, the technician saw it. It even had a metal padlock.They’d even discussed his training and the hard-to-miss chain with the MRI technician during their previous appointments, Jones-McAllister said.
“That was not the first time that guy has seen that chain” on her husband, she said. “They had a conversation about it before.”I'm not saying it's the husband's fault, but I don't think it's 100% on the technician either.
I read it more like she asked the technician to get her husband and called out to her husband who presumably just walked in.
Also, "they discussed the chain on a previous visit" doesn't really change anything. Depending on how many people that technician sees and when that last visit was, they might've just forgotten.
-
Isn't it an electomagnet?
it costs about thirty grand in helium every time you push it.
Oh, right, i forgot human lives have a price in the US.
It's not an electromagnet, it's a superconducting magnet. And turning it immediately off makes it melt.
