Coders or lemmy, what editors do you use? Is it worth learning a new one?
-
When I was in high school I found Sublime Text and learned "multiple cursors". Since then, I've transitioned to vscode, mainly because I need LSP (without too much configuration work) for my work.
I keep hearing about how modal editing is faster and I would like to switch to a more performant editor. I've been looking at helix, as the 4th generation of the vi line of editors. Is anyone using it? Is it any good for the main code editor?
The problem that I have is that learning new editing keybindings would probably take me a month of time, before I get to the same amount of productivity (if I ever get here at all). So I'm looking for advice of people who have already done that before.
My code editing does involve a lot of "ctrl-arrow" to move around words, "ctrl-shift-arrow" to select words, "home/end" to move to beginning/end of the line, "ctrl-d" for "new cursor at next occurrence", "shift-alt-down" for "new cursor in the line below", "ctrl-shift-f" for "format file" and a few more to move around using LSP-provided "declaration"/"usages".
I would have to unlearn all of that.
Also, I do use "ctrl-arrow" to edit this post. Have you changed keybindings in firefox too?
Dev of 25 years here: Cursor, for the LLM integration. It's based on VSCode, just way tighter AI integration. It's so good.
-
When I was in high school I found Sublime Text and learned "multiple cursors". Since then, I've transitioned to vscode, mainly because I need LSP (without too much configuration work) for my work.
I keep hearing about how modal editing is faster and I would like to switch to a more performant editor. I've been looking at helix, as the 4th generation of the vi line of editors. Is anyone using it? Is it any good for the main code editor?
The problem that I have is that learning new editing keybindings would probably take me a month of time, before I get to the same amount of productivity (if I ever get here at all). So I'm looking for advice of people who have already done that before.
My code editing does involve a lot of "ctrl-arrow" to move around words, "ctrl-shift-arrow" to select words, "home/end" to move to beginning/end of the line, "ctrl-d" for "new cursor at next occurrence", "shift-alt-down" for "new cursor in the line below", "ctrl-shift-f" for "format file" and a few more to move around using LSP-provided "declaration"/"usages".
I would have to unlearn all of that.
Also, I do use "ctrl-arrow" to edit this post. Have you changed keybindings in firefox too?
NeoVim plus tmux.
Great multi dimensional way of operating. You have access to the terminal and your ide.
It's beautiful
-
When I was in high school I found Sublime Text and learned "multiple cursors". Since then, I've transitioned to vscode, mainly because I need LSP (without too much configuration work) for my work.
I keep hearing about how modal editing is faster and I would like to switch to a more performant editor. I've been looking at helix, as the 4th generation of the vi line of editors. Is anyone using it? Is it any good for the main code editor?
The problem that I have is that learning new editing keybindings would probably take me a month of time, before I get to the same amount of productivity (if I ever get here at all). So I'm looking for advice of people who have already done that before.
My code editing does involve a lot of "ctrl-arrow" to move around words, "ctrl-shift-arrow" to select words, "home/end" to move to beginning/end of the line, "ctrl-d" for "new cursor at next occurrence", "shift-alt-down" for "new cursor in the line below", "ctrl-shift-f" for "format file" and a few more to move around using LSP-provided "declaration"/"usages".
I would have to unlearn all of that.
Also, I do use "ctrl-arrow" to edit this post. Have you changed keybindings in firefox too?
Doom Emacs
-
When I was in high school I found Sublime Text and learned "multiple cursors". Since then, I've transitioned to vscode, mainly because I need LSP (without too much configuration work) for my work.
I keep hearing about how modal editing is faster and I would like to switch to a more performant editor. I've been looking at helix, as the 4th generation of the vi line of editors. Is anyone using it? Is it any good for the main code editor?
The problem that I have is that learning new editing keybindings would probably take me a month of time, before I get to the same amount of productivity (if I ever get here at all). So I'm looking for advice of people who have already done that before.
My code editing does involve a lot of "ctrl-arrow" to move around words, "ctrl-shift-arrow" to select words, "home/end" to move to beginning/end of the line, "ctrl-d" for "new cursor at next occurrence", "shift-alt-down" for "new cursor in the line below", "ctrl-shift-f" for "format file" and a few more to move around using LSP-provided "declaration"/"usages".
I would have to unlearn all of that.
Also, I do use "ctrl-arrow" to edit this post. Have you changed keybindings in firefox too?
My editors
- Professionally I use Jetbrains stuff (intellij, pycharm, etc).
- At home I use Neovim because I like to have lsp support, I'm too cheap to pay for IDE's and I dislike VSCode for personal reasons. For quick edits I use default text editor e.g. kate/gedit.
My opinions on learning new editors
- If you need to go fast now, use what you know best.
- If you have time to learn just try whatever looks cool. Learning a new editor/way to edit text will broaden your horizons even if you don't end up using it.
-
When I was in high school I found Sublime Text and learned "multiple cursors". Since then, I've transitioned to vscode, mainly because I need LSP (without too much configuration work) for my work.
I keep hearing about how modal editing is faster and I would like to switch to a more performant editor. I've been looking at helix, as the 4th generation of the vi line of editors. Is anyone using it? Is it any good for the main code editor?
The problem that I have is that learning new editing keybindings would probably take me a month of time, before I get to the same amount of productivity (if I ever get here at all). So I'm looking for advice of people who have already done that before.
My code editing does involve a lot of "ctrl-arrow" to move around words, "ctrl-shift-arrow" to select words, "home/end" to move to beginning/end of the line, "ctrl-d" for "new cursor at next occurrence", "shift-alt-down" for "new cursor in the line below", "ctrl-shift-f" for "format file" and a few more to move around using LSP-provided "declaration"/"usages".
I would have to unlearn all of that.
Also, I do use "ctrl-arrow" to edit this post. Have you changed keybindings in firefox too?
I use the godot integrated code editor, but i am debating switching to writing the code in google slides and copying the text into notepad in a virtual machine
-
I read that, originally, Caps Lock was supposed to be the mode-changing key. For some historical reason that changed with Escape.
It's more that the position of the escape key changed. This was they layout of the keyboard vi was written on. Note the arrow keys too.
https://en.m.wikipedia.org/wiki/Vi_(text_editor)#/media/File:KB_Terminal_ADM3A.svg -
When I was in high school I found Sublime Text and learned "multiple cursors". Since then, I've transitioned to vscode, mainly because I need LSP (without too much configuration work) for my work.
I keep hearing about how modal editing is faster and I would like to switch to a more performant editor. I've been looking at helix, as the 4th generation of the vi line of editors. Is anyone using it? Is it any good for the main code editor?
The problem that I have is that learning new editing keybindings would probably take me a month of time, before I get to the same amount of productivity (if I ever get here at all). So I'm looking for advice of people who have already done that before.
My code editing does involve a lot of "ctrl-arrow" to move around words, "ctrl-shift-arrow" to select words, "home/end" to move to beginning/end of the line, "ctrl-d" for "new cursor at next occurrence", "shift-alt-down" for "new cursor in the line below", "ctrl-shift-f" for "format file" and a few more to move around using LSP-provided "declaration"/"usages".
I would have to unlearn all of that.
Also, I do use "ctrl-arrow" to edit this post. Have you changed keybindings in firefox too?
I use vim, or spacemacs with evil mode (emacs distribution with sensible shortcuts and vim emulation). Or VSCode with spacemacs emulation.
-
When I was in high school I found Sublime Text and learned "multiple cursors". Since then, I've transitioned to vscode, mainly because I need LSP (without too much configuration work) for my work.
I keep hearing about how modal editing is faster and I would like to switch to a more performant editor. I've been looking at helix, as the 4th generation of the vi line of editors. Is anyone using it? Is it any good for the main code editor?
The problem that I have is that learning new editing keybindings would probably take me a month of time, before I get to the same amount of productivity (if I ever get here at all). So I'm looking for advice of people who have already done that before.
My code editing does involve a lot of "ctrl-arrow" to move around words, "ctrl-shift-arrow" to select words, "home/end" to move to beginning/end of the line, "ctrl-d" for "new cursor at next occurrence", "shift-alt-down" for "new cursor in the line below", "ctrl-shift-f" for "format file" and a few more to move around using LSP-provided "declaration"/"usages".
I would have to unlearn all of that.
Also, I do use "ctrl-arrow" to edit this post. Have you changed keybindings in firefox too?
Not dev but I'm in IT/Cybersec mostly as it's much easier to find jobs there and I use vim just about everywhere, usually with tmux and i3 with custom vim-like keybinds (super+j move focus right etc), I use vim even on my phone in termux, with gboard.
At work I use gedit and gnome terminal or whatever cuz it's company time unless I'm personally interested in what I'm doing
-
When I was in high school I found Sublime Text and learned "multiple cursors". Since then, I've transitioned to vscode, mainly because I need LSP (without too much configuration work) for my work.
I keep hearing about how modal editing is faster and I would like to switch to a more performant editor. I've been looking at helix, as the 4th generation of the vi line of editors. Is anyone using it? Is it any good for the main code editor?
The problem that I have is that learning new editing keybindings would probably take me a month of time, before I get to the same amount of productivity (if I ever get here at all). So I'm looking for advice of people who have already done that before.
My code editing does involve a lot of "ctrl-arrow" to move around words, "ctrl-shift-arrow" to select words, "home/end" to move to beginning/end of the line, "ctrl-d" for "new cursor at next occurrence", "shift-alt-down" for "new cursor in the line below", "ctrl-shift-f" for "format file" and a few more to move around using LSP-provided "declaration"/"usages".
I would have to unlearn all of that.
Also, I do use "ctrl-arrow" to edit this post. Have you changed keybindings in firefox too?
I hate to be that guy but (neo)vim has served me well for too long. I don't even use any crazy maps or plugins; it's just comfy.
-
When I was in high school I found Sublime Text and learned "multiple cursors". Since then, I've transitioned to vscode, mainly because I need LSP (without too much configuration work) for my work.
I keep hearing about how modal editing is faster and I would like to switch to a more performant editor. I've been looking at helix, as the 4th generation of the vi line of editors. Is anyone using it? Is it any good for the main code editor?
The problem that I have is that learning new editing keybindings would probably take me a month of time, before I get to the same amount of productivity (if I ever get here at all). So I'm looking for advice of people who have already done that before.
My code editing does involve a lot of "ctrl-arrow" to move around words, "ctrl-shift-arrow" to select words, "home/end" to move to beginning/end of the line, "ctrl-d" for "new cursor at next occurrence", "shift-alt-down" for "new cursor in the line below", "ctrl-shift-f" for "format file" and a few more to move around using LSP-provided "declaration"/"usages".
I would have to unlearn all of that.
Also, I do use "ctrl-arrow" to edit this post. Have you changed keybindings in firefox too?
I've tried to learn Vim in the past but IMO it is not worth it at all. In a world without multiple cursors... sure, maybe. With multiple cursors? No way. I can can edit just as fast as I've seen any Vim user do it, and without having to remember a gazillion mnemonics and deal with the silly modal thing.
Multiple cursor editing even has some significant advantages over Vim style, e.g. it's interactive, so you can do your edit gradually and go back if you make a mistake. Rather than having to write a complex command and only finding out it if works at the end. (If you've used regex find & replace you'll understand that problem.)
I'll probably get downvoted for this since Vim is kind of a cult, and Vim users get a sense of superiority from it. Kind of like audiophiles - they don't appreciate it if you tell them their £10k valve amp doesn't actually sound any better than your £1k digital amp.
For editing on remote computers I use VSCode remote or Micro for quick tasks.
-
I use Jetbrains' products for all my coding needs.
Same. Jetbrains makes the best IDEs hands down IMO and I say this after 20 years of coding and using numerous IDEs. I also use vscode as a backup but as more of a glorified text editor.
-
When I was in high school I found Sublime Text and learned "multiple cursors". Since then, I've transitioned to vscode, mainly because I need LSP (without too much configuration work) for my work.
I keep hearing about how modal editing is faster and I would like to switch to a more performant editor. I've been looking at helix, as the 4th generation of the vi line of editors. Is anyone using it? Is it any good for the main code editor?
The problem that I have is that learning new editing keybindings would probably take me a month of time, before I get to the same amount of productivity (if I ever get here at all). So I'm looking for advice of people who have already done that before.
My code editing does involve a lot of "ctrl-arrow" to move around words, "ctrl-shift-arrow" to select words, "home/end" to move to beginning/end of the line, "ctrl-d" for "new cursor at next occurrence", "shift-alt-down" for "new cursor in the line below", "ctrl-shift-f" for "format file" and a few more to move around using LSP-provided "declaration"/"usages".
I would have to unlearn all of that.
Also, I do use "ctrl-arrow" to edit this post. Have you changed keybindings in firefox too?
vscode + whatever connection plugin you need + vim plugin
-
I've tried to learn Vim in the past but IMO it is not worth it at all. In a world without multiple cursors... sure, maybe. With multiple cursors? No way. I can can edit just as fast as I've seen any Vim user do it, and without having to remember a gazillion mnemonics and deal with the silly modal thing.
Multiple cursor editing even has some significant advantages over Vim style, e.g. it's interactive, so you can do your edit gradually and go back if you make a mistake. Rather than having to write a complex command and only finding out it if works at the end. (If you've used regex find & replace you'll understand that problem.)
I'll probably get downvoted for this since Vim is kind of a cult, and Vim users get a sense of superiority from it. Kind of like audiophiles - they don't appreciate it if you tell them their £10k valve amp doesn't actually sound any better than your £1k digital amp.
For editing on remote computers I use VSCode remote or Micro for quick tasks.
vi WAS almost ubiquitously installed on any host you’d connect to, so it was worth learning.
The reason we like it is because it’s been iterated over to be useful for modifying the types of files you’d be editing. It has a significant plugin ecosphere and does its job well.
For editing on remote computers I use VSCode remote or Micro for quick tasks.
and vim is the 10k amp in your analogy … huh.
-
When I was in high school I found Sublime Text and learned "multiple cursors". Since then, I've transitioned to vscode, mainly because I need LSP (without too much configuration work) for my work.
I keep hearing about how modal editing is faster and I would like to switch to a more performant editor. I've been looking at helix, as the 4th generation of the vi line of editors. Is anyone using it? Is it any good for the main code editor?
The problem that I have is that learning new editing keybindings would probably take me a month of time, before I get to the same amount of productivity (if I ever get here at all). So I'm looking for advice of people who have already done that before.
My code editing does involve a lot of "ctrl-arrow" to move around words, "ctrl-shift-arrow" to select words, "home/end" to move to beginning/end of the line, "ctrl-d" for "new cursor at next occurrence", "shift-alt-down" for "new cursor in the line below", "ctrl-shift-f" for "format file" and a few more to move around using LSP-provided "declaration"/"usages".
I would have to unlearn all of that.
Also, I do use "ctrl-arrow" to edit this post. Have you changed keybindings in firefox too?
I swapped to neovim 10 months ago. Haven't looked back. Actually, I've looked back a LOT for the first few weeks because I couldn't figure out how to do certain things. But the more you learn the better it becomes. Not needing your mouse is SO good.
-
When I was in high school I found Sublime Text and learned "multiple cursors". Since then, I've transitioned to vscode, mainly because I need LSP (without too much configuration work) for my work.
I keep hearing about how modal editing is faster and I would like to switch to a more performant editor. I've been looking at helix, as the 4th generation of the vi line of editors. Is anyone using it? Is it any good for the main code editor?
The problem that I have is that learning new editing keybindings would probably take me a month of time, before I get to the same amount of productivity (if I ever get here at all). So I'm looking for advice of people who have already done that before.
My code editing does involve a lot of "ctrl-arrow" to move around words, "ctrl-shift-arrow" to select words, "home/end" to move to beginning/end of the line, "ctrl-d" for "new cursor at next occurrence", "shift-alt-down" for "new cursor in the line below", "ctrl-shift-f" for "format file" and a few more to move around using LSP-provided "declaration"/"usages".
I would have to unlearn all of that.
Also, I do use "ctrl-arrow" to edit this post. Have you changed keybindings in firefox too?
I started with neovim because I hate my laptop's mousepad, and that's often pushed as a benefit of modal editors, not needing the mouse. After I used it for a while I found that not only could you do stuff that you could do stuff easily that would be difficult in, say vs code, but it was also pretty fun. It's honestly a bit of a power trip sometimes, makes me feel like a 90s tv hacker. Also plugins. So many neat plugins.
-
When I was in high school I found Sublime Text and learned "multiple cursors". Since then, I've transitioned to vscode, mainly because I need LSP (without too much configuration work) for my work.
I keep hearing about how modal editing is faster and I would like to switch to a more performant editor. I've been looking at helix, as the 4th generation of the vi line of editors. Is anyone using it? Is it any good for the main code editor?
The problem that I have is that learning new editing keybindings would probably take me a month of time, before I get to the same amount of productivity (if I ever get here at all). So I'm looking for advice of people who have already done that before.
My code editing does involve a lot of "ctrl-arrow" to move around words, "ctrl-shift-arrow" to select words, "home/end" to move to beginning/end of the line, "ctrl-d" for "new cursor at next occurrence", "shift-alt-down" for "new cursor in the line below", "ctrl-shift-f" for "format file" and a few more to move around using LSP-provided "declaration"/"usages".
I would have to unlearn all of that.
Also, I do use "ctrl-arrow" to edit this post. Have you changed keybindings in firefox too?
I'm still learning to code, but I tried out a bunch and I've liked using Vim, VScodium and Pycharm.
-
When I was in high school I found Sublime Text and learned "multiple cursors". Since then, I've transitioned to vscode, mainly because I need LSP (without too much configuration work) for my work.
I keep hearing about how modal editing is faster and I would like to switch to a more performant editor. I've been looking at helix, as the 4th generation of the vi line of editors. Is anyone using it? Is it any good for the main code editor?
The problem that I have is that learning new editing keybindings would probably take me a month of time, before I get to the same amount of productivity (if I ever get here at all). So I'm looking for advice of people who have already done that before.
My code editing does involve a lot of "ctrl-arrow" to move around words, "ctrl-shift-arrow" to select words, "home/end" to move to beginning/end of the line, "ctrl-d" for "new cursor at next occurrence", "shift-alt-down" for "new cursor in the line below", "ctrl-shift-f" for "format file" and a few more to move around using LSP-provided "declaration"/"usages".
I would have to unlearn all of that.
Also, I do use "ctrl-arrow" to edit this post. Have you changed keybindings in firefox too?
Neovim, Emacs, Helix and VSCode.
Zed has been fun.
VsCode and Pycharm are just too slow for me. You need a very fast machine with a lot of RAM.
-
When I was in high school I found Sublime Text and learned "multiple cursors". Since then, I've transitioned to vscode, mainly because I need LSP (without too much configuration work) for my work.
I keep hearing about how modal editing is faster and I would like to switch to a more performant editor. I've been looking at helix, as the 4th generation of the vi line of editors. Is anyone using it? Is it any good for the main code editor?
The problem that I have is that learning new editing keybindings would probably take me a month of time, before I get to the same amount of productivity (if I ever get here at all). So I'm looking for advice of people who have already done that before.
My code editing does involve a lot of "ctrl-arrow" to move around words, "ctrl-shift-arrow" to select words, "home/end" to move to beginning/end of the line, "ctrl-d" for "new cursor at next occurrence", "shift-alt-down" for "new cursor in the line below", "ctrl-shift-f" for "format file" and a few more to move around using LSP-provided "declaration"/"usages".
I would have to unlearn all of that.
Also, I do use "ctrl-arrow" to edit this post. Have you changed keybindings in firefox too?
I use emacs when on my personal machines. VS Code at work.
The fastest tool is the one you are best at using. I find that my tool doesn't make me fast, my ability to solve issues makes me fast. I very rarely learn a new tool unless it accomplishes something for me my other tools do not.
For example, at work I use windows and regularly ssh to servers. My entire job is spent ssh'd into other servers. Emacs terminal emulator is spotty at best when using ssh on windows. There are ways to make it work, but some modifications get flagged by our SEIMs. So in that case I use vs code, and the ssh remote connection options and split terminal interface.
At home I use emacs. I have all Linux machines so my terminal plays nicely. I also am working on reducing my RSI from years of tech work. The less mousing I have to do, the better. Emacs allows me to keep my hands on my keyboard.
-
When I was in high school I found Sublime Text and learned "multiple cursors". Since then, I've transitioned to vscode, mainly because I need LSP (without too much configuration work) for my work.
I keep hearing about how modal editing is faster and I would like to switch to a more performant editor. I've been looking at helix, as the 4th generation of the vi line of editors. Is anyone using it? Is it any good for the main code editor?
The problem that I have is that learning new editing keybindings would probably take me a month of time, before I get to the same amount of productivity (if I ever get here at all). So I'm looking for advice of people who have already done that before.
My code editing does involve a lot of "ctrl-arrow" to move around words, "ctrl-shift-arrow" to select words, "home/end" to move to beginning/end of the line, "ctrl-d" for "new cursor at next occurrence", "shift-alt-down" for "new cursor in the line below", "ctrl-shift-f" for "format file" and a few more to move around using LSP-provided "declaration"/"usages".
I would have to unlearn all of that.
Also, I do use "ctrl-arrow" to edit this post. Have you changed keybindings in firefox too?
I used to use VSCodium, but in my quest to touch the mouse as little as possible I switched to Neovim.
-
Ahhh nice, I have thought about trying out Kakoune as it supports plugins. Do you use many plugins/find them useful?
Helix does have a pipe command also.
I've mostly just tweaked the configuration and built my own comment formatter/reflow command based on the comment style at work.
It's almost more about what it doesn't have for me, because what I've run into a lot with trying newer editors is they try and manage the code too much and the code base at work has its own style guide that doesn't match what the editor tries to do. So the editor might make me slightly more productive ... until I find myself fighting with it every 3 lines because of auto formatting or some language server quirk.
#/media/File:KB_Terminal_ADM3A.svg){kind=link}