[Louis Rossmann] Brother turns heel & becomes anti-consumer printer company
-
This post did not contain any content.
I have a Brother MFC-9340CDW that I salvaged from work last year, we replaced it because it kept getting a ghost "paper jam" every time you tried to print something. Turns out the cause is an $18 board that's known to fail.
Now to figure out how to disable automatic firmware updates
-
This post did not contain any content.
It looks like the latest firmware on their website for my old-ass black & white brother laser was released in 2019.
Hopefully that thing lasts another few decades on top of the ~15 years I’ve already had it, because it sounds like it’s the last printer I’m going to buy.
-
This post did not contain any content.
It's funny how far ahead 3d printers are in terms of consumer experience, everything is open, everything works and the tech is like 300 times more complex.
2D printer companies should be shamed to death.
-
Am I just jaded about the whole internet or does this read like an AI summary? It feels too specific to be written by a human.
If we reach a point where an AI can summarize a video to that degree and provide background summaries, I'd happily use it. I mean, I'd mark the origin, but nah, this is just me.
-
Shit. I didn't even think of that. I'm using fedora. Tomorrow I'll be blocking firmware updates for the printer. Thank you for pointing that out.
I should qualify that -- I don't know for sure whether and which distros enable updates to run non-interactively.
fwupdhas the ability to do so and it's billed as doing so on its github page, but that doesn't mean that a distro has to actually take advantage of that. Could be that in a default configuration on a given distro, it only updates stuff next time you invoke it. -
It's funny how far ahead 3d printers are in terms of consumer experience, everything is open, everything works and the tech is like 300 times more complex.
2D printer companies should be shamed to death.
This is mainly because consumer 3d printer have been developped by 3d printing enthusiast first and not a company, Prusa which was leader for some time used a lot of open sources project to build their printers. As it's getting mainstream as time goes by more and more companies shows up with closed sources project sadly.
-
I heard Brother was good, then I spent way too long formatting different USB sticks in different cluster sizes and formats, and never got ours to work with any of them. Don't buy Brother if you want that feature, either.
FYI an MBR table with a fat32 partition is probably what it was looking for. If that doesn't work odds are the port is broken
-
It's funny how far ahead 3d printers are in terms of consumer experience, everything is open, everything works and the tech is like 300 times more complex.
2D printer companies should be shamed to death.
Over time as 3D printers go from tinkerer's toy to household staple, I'd expect them to become more locked down and anti-consumer.
-
This post did not contain any content.
Can't watch right now, but is there a list of affected devices?
-
It's funny how far ahead 3d printers are in terms of consumer experience, everything is open, everything works and the tech is like 300 times more complex.
2D printer companies should be shamed to death.
Except those who aren't.
-
I no longer have any corporate relationships that aren't either apprehensive, strained, or downright antagonistic.
It's us versus them now and they've give their last shits. It's feeling like every company is a cable company now.
Always has been like that.
Not one single corporation is your friend or wants to be. All they want is your money. No exceptions.
-
It's funny how far ahead 3d printers are in terms of consumer experience, everything is open, everything works and the tech is like 300 times more complex.
2D printer companies should be shamed to death.
Has anyone figured out how to 3d print a 2d printer yet?
-
It's funny how far ahead 3d printers are in terms of consumer experience, everything is open, everything works and the tech is like 300 times more complex.
2D printer companies should be shamed to death.
Don't worry. Companies like Bambu and others are trying to lock down shift their printer business in the style of 2d printer companies. I hope it at least happens very slowly, but the enshittification is happening...
-
Over time as 3D printers go from tinkerer's toy to household staple, I'd expect them to become more locked down and anti-consumer.
By my count, it's been tried twice.
-
This is mainly because consumer 3d printer have been developped by 3d printing enthusiast first and not a company, Prusa which was leader for some time used a lot of open sources project to build their printers. As it's getting mainstream as time goes by more and more companies shows up with closed sources project sadly.
Isn’t prusa now doing anti consumer / closed source stuff?
-
This post did not contain any content.
I didn't even know he had a brother.
-
This post did not contain any content.
Do we really need to crowd fund a FOSS printer? Really?
-
Over time as 3D printers go from tinkerer's toy to household staple, I'd expect them to become more locked down and anti-consumer.
They would have to become sci-fi level capable before they would be considered household staple items.
-
Has anyone figured out how to 3d print a 2d printer yet?
There is a piece of software which will take a word document and convert it into an embossed 3D print file. So you could always just skip the middleman and 3D print yourself a plaque version of your document instead.
-
This post did not contain any content.
"Bröther, please dö nöt becöme anti-cönsümer!"
"I töö yearn för the cöntrölled mönöpöly, thë ensittificätiön, the röt ecönömy!"
"Brother..."
"I'm leäving töö müch möney on thë täblë! We also hävë öür men Ëlön Müsk as thë shädöw prësidënt, Trümp ïs jüst hïs, ör räthër - öür püppët. Hë wïll dïsmänlë äll cönsümër prötëctïons, as thëy're in thë wäy öf öür pröfits."
"Bröthër... Plëäsë rëcönsïdër!"
"Änd whät ärë yöü gönnä dö if not? Go tö thë cönsümer prötection agencies Ëlön Müsk's DÖGË jüst dïsmäntlëd? Üse an öld HP LaserJet until yöü cän get repläcemënt rollers för it? You know öther parts öf it cän brëäk töö."
"Bröther... You became... ËVÏL! You betrayed EVERYTHING you previously stood for!"
"And Ï wïll dö it as mäny tïmes as nëëded. Ëvil? It's jüst büsïnëss. Mäybë yöü shöüld hävë rëcönsïdërëd yöür vötë för Trümp."
"Bröther... Büt thë tränsës hävë cäncëlled Pikamëë för thë wïzärd gämë! The wökenëss häve been deströying the gäme ïndüstry! I nëëded tö vötë för Dönäld Trümp! Why isn't it wörkïng äs ït wäs süppösëd tö!"
"Yöü vötëd ägäïnst yöür cläss interest öut öf püre hatred. I like ït vërÿ müch! Yöü knöw önë rëäsön she wäs älsö cäncelled wäs düë tö lölï? Ï dön't think Pröjëct 2025 wïll ällöw it för sö löng düë tö tötäl pörn ban!"
"PLEÄSE BRÖTHËR, NÖT THE LÖLÏ! PLEÄSE LET ME KEEP THË CÜTË ÄND FÜNNŸ!"
"Yöü vöted against yöür class interest, yöür personal interest... hahahahahaHAAHAHAHAHAAAA! Yöür sö fünny! Ÿöü'rë thë përfëct vötër för më! Ÿöü'rë thë përfëct cönsümër ëvën! Töö dümb tö rëälïzë äll thë pöliticäl wörkings aröünd yöürself. Änd when anything göes wröng, yöü bläme the minörities öf this söciety. Nöw get exited för Bröther AI, a sübscriptiön service which is essentiäl för öperating the printer! Get ready för price hikes! Get ready för shörter lasting printers!"
"You're truly despicable bröther!"
