Are there any common household items or products that you think are designed incredibly poorly?
-
Don't they fit in a draw?
Sure, but my fridge is pretty much right beside the stove so it works out nicely for me.
-
Some toilets have a perfectly round bowl so they don't stick out as far and take up bathroom floor space - and they work fine, but only in bathrooms that anticipate the vast majority of its occupants to be equipped with a vagina. For those of us rocking a penis, those fucking toilets are horrible - sitting on that damn thing requires you to contort your junk around like some sausage-Houdini as you're sitting, so that you can guide it through the remaining 2 square inches of open space not occupied by your legs or ass. Then when you're actually seated, you still have to sit there and awkwardly hold the thing so it stays pointed straight down.
Fuck up any part of that, and the tip of your dick hits the seat or the inside of the bowl.
...and they must be like $3 cheaper than an oval toilet or something, cuz 99% of US apartments seem to be equipped with the round, vagina-only toilets.
Oval bowls are the way. No matter what's in your pants, it gets the job done without the significantly increased biohazard risk.
I guess in fairness, the problem isn't with their design, it's with the people who purchase the toilets treating them as sex-neutral when no the fuck they aren't!
In my parent home there's a octagonal toilet badly shaped so is uncomfortable to seat parallel(the same way you seat in a oval one) because the seat is too long and is uncomfortable to seat crossing the seat because is too narrow, you need to seat diagonally but because is octagonal your dick hits the bowl. Extremely annoying design.
-
I feel like plastic packaging in general has become much harder to rip open at the seam.
Anyone else notice this, or am I just much weaker now?Some of them are outright ridiculous. Like one of the protein cookie brands I like, 80% of the time I have to hulk out and end up ripping the packaging to shreds. We also see it on chip packages and cereal bags at times too. It's crazy.
-
For example, I'm incredibly confused about how you're supposedly to measure liquid laundry detergent with the cap. At least the kind that I have sits on it's side, so if you measure it with the cap it just leaks everywhere and makes a mess.
Or at my parents house they have a bag of captain crunch berries that has a new design, where instead of zipping along the top of the bag like normal, it has a zipper in the front slightly beneath the top. That way when you poor it you can't see what you're doing cuz the bag is in the way. Like what the heck who's idea was that?
Reusable water bottles, especially their lids. They build up microorganisms faster than a petri dish and the more complex the bottles are, the worse it is.
Worst offender are the ones with integrated straws. Sure, they look nice and are a good idea, but cleaning them thoroughly is a nightmare. Also, I don't know how people tolerate the ones with exposed straws or mouthpieces. Isn't that incredibly unsanitary?
More generally, why doesn't anyone except for Nalgene make reusable bottles without rubber gaskets? Gaskets get stinky, then you have to peel them out, scrub like mad, and then awkwardly stretch them back in. I've been looking for a metal water bottle without a gasket for ages. They literally just need to shove the Nalgene-type screw-on top into a metal body.
Bonus points if someone designs a gasket-less bottle that opens in the middle so I don't have to fiddle with a bottle brush every time I wash it.
-
Protip: Buy the XXXXXL size, throw it over your junk, then shrink-wrap it with a heat gun.
Just don't use ordinary shrink tubing, it doesn't seal properly in the front and may tighten too hard for comfort
-
Hangers with those hooks on the sides that I guess are meant to slip the collar of the shirts into? They don't really serve as a good use plus they seem to get tangled with other hangers at times and hang securely anyways. I've seen better hangers at work where there is a strip of some rubber compound on the top sides of each hanger, they hold things much better and I feel that's the more better of the design for a hanger.
They come in handy when air drying heavy, damp shirts
-
For example, I'm incredibly confused about how you're supposedly to measure liquid laundry detergent with the cap. At least the kind that I have sits on it's side, so if you measure it with the cap it just leaks everywhere and makes a mess.
Or at my parents house they have a bag of captain crunch berries that has a new design, where instead of zipping along the top of the bag like normal, it has a zipper in the front slightly beneath the top. That way when you poor it you can't see what you're doing cuz the bag is in the way. Like what the heck who's idea was that?
light bulbs that die too often.
those pots and sauce pans that use a screw to connect the handle. the screw head generally places inside the pot and will get to all your food.
chopping boards. plastic chopping boards enhance your meals with microplastic. composite wood enhances your food with bacteria lodged in-between wood pieces. bamboo -- too thin and ends up similar to composite.
-
I'll mention you can get detergent sheets and they work fine. No more messing with powders of liquids for me.
I also like powdered detergent. I get mine from the package free store and then add in those scent boosts pellets for our scent only. Work so much better than liquid detergent
-
Most clothes, oddly gendered and sexist and it's fucking weird having different clothes for people who identify differently, like clothes are clothes. Make them for everyone. It's fucking wild.
Freesewing.org tries to do that, but just ends up awkwardly referring to "people with/without breasts" instead.
-
If they're anything like the pegs I got, vinegar won't help, they basically crumbled to dust!
Microplastics dust
-
How hard are you pulling out towels that there's a risk of getting caught up in it ?
Towels (or other clothes) can stick to the drum and as you pull them out, the balance of the drum shifts and can cause it to spin. If you are grabbing something in a fuller load, your hand/wrist can become entangled and rotate with the drum.
-
The cap is a scam, it used to be the size of a soda bottles; now it's a literal cup.
you don't need to measure laundry liquid anyway,
just put the absolute minimum amount you can pour from the bottle directly in the machine and do 2 or 3 loads.
Or if you must use the cap, just drop the cap with the detergent in with the laundry. It will clean itself.
-
light bulbs that die too often.
those pots and sauce pans that use a screw to connect the handle. the screw head generally places inside the pot and will get to all your food.
chopping boards. plastic chopping boards enhance your meals with microplastic. composite wood enhances your food with bacteria lodged in-between wood pieces. bamboo -- too thin and ends up similar to composite.
I think there are glass cutting boards wouldn't that work for you
-
Reusable water bottles, especially their lids. They build up microorganisms faster than a petri dish and the more complex the bottles are, the worse it is.
Worst offender are the ones with integrated straws. Sure, they look nice and are a good idea, but cleaning them thoroughly is a nightmare. Also, I don't know how people tolerate the ones with exposed straws or mouthpieces. Isn't that incredibly unsanitary?
More generally, why doesn't anyone except for Nalgene make reusable bottles without rubber gaskets? Gaskets get stinky, then you have to peel them out, scrub like mad, and then awkwardly stretch them back in. I've been looking for a metal water bottle without a gasket for ages. They literally just need to shove the Nalgene-type screw-on top into a metal body.
Bonus points if someone designs a gasket-less bottle that opens in the middle so I don't have to fiddle with a bottle brush every time I wash it.
The issue you're highlighting is due to the different between metal and plastic. I have an Orca bottle that has a plastic lid that screws on without any rubber gasket and I end up with shreds of plastic in the bottle.
Plastic rubbing on metal leads to the plastic degrading and metal on metal does not make a good seal, so I think a rubber gasket is your only option.
-
Overtime, our kitchen knives. Knives need to be thin, as thinner knives cut through ingredients more easily. Today's knives are designed instead to be marketed. Something incredibly thick, and sturdy, to make it feel "premium", when all its doing is tiring you out, since using a heavy knife gets exhausting, especially when its so thick it wedges in ingredients.
Vintage European knives are slim, and almost petite, because they knew how to make a good knife, in the same manner japanese knives are ground extremely thin, sometimes thinner than a postcard.
There's a balance that needs to be maintained. A general purpose knife like a chef's knife needs some thickness to it, otherwise it can't effectively chop through tougher things. It's also not a knife you are supposed to hold the full weight of when cutting most things. Thin knives are awful for things like cutting a cabbage in half or cutting chicken bones.
-
I think there are glass cutting boards wouldn't that work for you
They dull knives
-
Most clothes, oddly gendered and sexist and it's fucking weird having different clothes for people who identify differently, like clothes are clothes. Make them for everyone. It's fucking wild.
Yeah I hate having button downs that tuck only one inch into my waist (I'm a man)
-
Reusable water bottles, especially their lids. They build up microorganisms faster than a petri dish and the more complex the bottles are, the worse it is.
Worst offender are the ones with integrated straws. Sure, they look nice and are a good idea, but cleaning them thoroughly is a nightmare. Also, I don't know how people tolerate the ones with exposed straws or mouthpieces. Isn't that incredibly unsanitary?
More generally, why doesn't anyone except for Nalgene make reusable bottles without rubber gaskets? Gaskets get stinky, then you have to peel them out, scrub like mad, and then awkwardly stretch them back in. I've been looking for a metal water bottle without a gasket for ages. They literally just need to shove the Nalgene-type screw-on top into a metal body.
Bonus points if someone designs a gasket-less bottle that opens in the middle so I don't have to fiddle with a bottle brush every time I wash it.
I love my simple metal Yeti bottles.
-
For example, I'm incredibly confused about how you're supposedly to measure liquid laundry detergent with the cap. At least the kind that I have sits on it's side, so if you measure it with the cap it just leaks everywhere and makes a mess.
Or at my parents house they have a bag of captain crunch berries that has a new design, where instead of zipping along the top of the bag like normal, it has a zipper in the front slightly beneath the top. That way when you poor it you can't see what you're doing cuz the bag is in the way. Like what the heck who's idea was that?
Chairs and tables. Why do I have to squeeze my thighs between the chair and the dinner table and then bend down awkwardly when I eat to not splatter all over? Why are chairs so high and tables so low? Just put the table higher so the food is closer to my mouth and why do we even need chairs anyway?
Milk cartons suck now. I'm the 90s, we could fold and push to open. Why do we need scissors to open them now? Oh and half of them now have a plastic lid in the middle so you can't even pour out the last drops anymore.
-
For example, I'm incredibly confused about how you're supposedly to measure liquid laundry detergent with the cap. At least the kind that I have sits on it's side, so if you measure it with the cap it just leaks everywhere and makes a mess.
Or at my parents house they have a bag of captain crunch berries that has a new design, where instead of zipping along the top of the bag like normal, it has a zipper in the front slightly beneath the top. That way when you poor it you can't see what you're doing cuz the bag is in the way. Like what the heck who's idea was that?
A lot of OTC meds that are in boxes have annoying packaging where you have to peel off the little paper before you can push the pill through the wrapping. The paper doesn't always like to peel off properly and it makes it harder to get the pill out of the packaging.
