introducing copyparty, the FOSS file server
-
Wo wo wow, is that my man JC Denton ??
"There are two editors in case you hate one of them"
You crack me up !!!
-
I made a video about copyparty, the selfhosted fileserver I've been making for the past 5 years.
The main focus of the video is the features, but it also touches upon configuration. Was hoping it would be easier to follow than the readme on github... not sure how well that went, but hey
This video is also available to watch on the copyparty demo server, as a high-quality AV1 file and a lower-quality h264.
this looks amazing! (from the youtube video. also the controls/features seem to be well thought-through) i'll give it a shot tomorrow
-
Are China Parties like Tupperware Parties, where friends get together and one shills a pyramid scheme? That's what CP is, right?
wrote last edited by [email protected]no, CP is copypasta, the thing you put into your food boxes.
-
I made a video about copyparty, the selfhosted fileserver I've been making for the past 5 years.
The main focus of the video is the features, but it also touches upon configuration. Was hoping it would be easier to follow than the readme on github... not sure how well that went, but hey
This video is also available to watch on the copyparty demo server, as a high-quality AV1 file and a lower-quality h264.
This looks great, nothing to check it out.
-
I bumped into copyparty the other month when looking for a software that could let me transfer files to a friend with the ability to pause/resume. Didn't bother with it, tried another software instead. Never really got it to work so I gave up on it.
Bumped into the YouTube video today, decided to give copyparty a shot, damn sir you've written a fine piece of software. It's so easy to get up and configure. The UI is a bit janky, but charming at the same time. Thanks for all the hard work!
"It's janky. It's charming. It works. It's Copyparty."
-
I made a video about copyparty, the selfhosted fileserver I've been making for the past 5 years.
The main focus of the video is the features, but it also touches upon configuration. Was hoping it would be easier to follow than the readme on github... not sure how well that went, but hey
This video is also available to watch on the copyparty demo server, as a high-quality AV1 file and a lower-quality h264.
Ho... Ly... Shit... This is great! The UI is a bit confusing at first but doesn't take long to get what's going on. I might even be disappointed with a UI revamp
I can't believe how much functionality this has. It's already replacing some processes I have for mounting drives and backing up files. Maybe I missed something, but my only complaint would be the lack of an automatic one-way folder sync in the Party UP! app.I'm blown away, great job!
-
The fact you mention security features, without ever saying it's 'super secure' tells me you know a lot about what you're doing. I'm so sick of apps like this that start with "most secure app on the net" but you know they're delusional. Thank you, going to check this out.
so uhh, sorry for the late response to this -- was going to reply much earlier, but then suddenly it became more timely than ever...
the good news is, I'm fairly confident in how it handles the filesystem and permissions, preventing unauthorized access to files.
but the part I'm a bit less sure about is sanitizing user data; the kind of vulnerabilities where someone uploads a malicious file and bad stuff happens if you then open that file in a certain way, or someone sends you a malicious link and trick you into clicking it -- in other words, the kind of vulnerabilities which require the attacker to have a certain level of access already, or that requires tricking you into doing something.
...and with version 1.18.5 released just now, we got a prime example of exactly one of those. Really unfortunate timing, but it's a blessing to have so many new and curious eyes on it to spot these sooner rather than later. It is what it is.
-
sooo this is one of the things that started with someone saying "wouldn't it be funny if..."
if you open copyparty-sfx.py in a text editor, you'll see how -- but please make sure to use an editor which is able to handle about 600 KiB of comments which contain invalid utf8 / binary garbage
I ended up rolling my own packer since I wanted optimal encoding efficiency, and everything I could find would do stuff like base85 or ucs2 tricks, but it turns out python is perfectly happy with binary garbage in comments if you declare that the file is
latin-1so it realizes all hope is lostthe only drawback of the sfx.py is that it needs to extract to $TEMP before running, so that's the slight advantage of the zipapp (the .pyz alternative), but that suffers from some performance reduction in return, and is more hermetic (doesn't let you swap out the bundled dependencies with fresh versions as easily if necessary)
Why not use zipapp?
-
@tripflag @disobey2623 Your statement is correct; the way seafile stores files is in blocks (for de-duplication, apparently).
They offer a fuse extension that allows you to view stuff like a normal filesystem, though I've never tried it: https://manual.seafile.com/latest/extension/fuse/
And obviously, encrypted folders can't be accessed through the file system even with the fuse add on, because that would break the whole point of encryption.
To me, the one big advantage Seafile has is its e2e encryption and encrypted folders, as it allows me to host it externally without allowing access to my files to the server administrator.
-
I made a video about copyparty, the selfhosted fileserver I've been making for the past 5 years.
The main focus of the video is the features, but it also touches upon configuration. Was hoping it would be easier to follow than the readme on github... not sure how well that went, but hey
This video is also available to watch on the copyparty demo server, as a high-quality AV1 file and a lower-quality h264.
I see flake.nix, i install.
-
Yep! Depending on what your home connection looks like, you have a few options:
if you are lucky enough to have your own private IP-address and are able to open ports, then you're almost done already -- you can put copyparty on some port (or keep the default 3923), and then anyone could connect to it by going to https://your.ip.address:3923/
(with this approach, you will want to create your own HTTPS certificate so the traffic is properly encrypted -- the best option here is to get a domain and get a certificate for the domain)
however, if you are behind CGNAT, meaning your internet provider has given you a shared IP-address, then people cannot connect directly to your home-PC. One way around that issue is by setting up a machine somewhere on the internet which bridges the gap back home to your PC. Cloudflare offers this as service, and this is explained in the copyparty readme -- see the "at home" section for one way to do that.
if you are against using Cloudflare for idealistic reasons (they are becoming quite powerful since they run a whole lot of the internet), then you can set up a cheap VPS which serves the same purpose. That's my setup, and how you are accessing the copyparty demo server right now -- I have the cheapest VPS you can get from Hetzner. The VPS is running nginx, and it forwards the traffic to my homeserver through an SSH tunnel. I haven't documented this approach in the copyparty readme, but I have a feeling a lot of other people have
Please, it would be nice to document this VPS setup!
-
I made a video about copyparty, the selfhosted fileserver I've been making for the past 5 years.
The main focus of the video is the features, but it also touches upon configuration. Was hoping it would be easier to follow than the readme on github... not sure how well that went, but hey
This video is also available to watch on the copyparty demo server, as a high-quality AV1 file and a lower-quality h264.
wrote last edited by [email protected]I played around with copyparty and I have to say it is just awesome! The config is just fun to mess around with and everything feels snappy.
But I ran into an issue with FTP (probably just something I configured incorrectly) and could not find a discussion for that. I should probably start an issue on Github but as a non-developer I'm not sure how to do that in the correct way.
Edit: I managed to "solve" the problem. Apparently the user uploading to a subfolder over FTP needs the move permission for the folder above said subfolder.
-
Put out some in-depth docker instructions and this will be common use in a month. Good work.
The docker compose file worked great for me.
-
The docker compose file worked great for me.
They may have patched it. I'll check it out thanks.
-
I made a video about copyparty, the selfhosted fileserver I've been making for the past 5 years.
The main focus of the video is the features, but it also touches upon configuration. Was hoping it would be easier to follow than the readme on github... not sure how well that went, but hey
This video is also available to watch on the copyparty demo server, as a high-quality AV1 file and a lower-quality h264.
Wow.
This works crazy fast and performant. Keep up the incredible work!
-
Ho... Ly... Shit... This is great! The UI is a bit confusing at first but doesn't take long to get what's going on. I might even be disappointed with a UI revamp
I can't believe how much functionality this has. It's already replacing some processes I have for mounting drives and backing up files. Maybe I missed something, but my only complaint would be the lack of an automatic one-way folder sync in the Party UP! app.I'm blown away, great job!
That "functional but charming" UI reminds me of audiobookshelf with the soundleaf app - same vibe where it dosn't look fancy but gets the job done better than most polished alternatives!
